Effect of ball milling on graphene reinforced Al6061 composite fabricated by semi-solid sintering

被引：351
|
作者：
Bastwros, Mina [1 ]
Kim, Gap-Yong [1 ]
Zhu, Can [1 ]
Zhang, Kun [2 ]
Wang, Shiren [2 ]
Tang, Xiaoduan [1 ]
Wang, Xinwei [1 ]
机构：
[1] Iowa State Univ, Dept Mech Engn, Ames, IA 50011 USA
[2] Texas Tech Univ, Dept Ind Engn, Lubbock, TX 79409 USA
来源：
COMPOSITES PART B-ENGINEERING | 2014年 / 60卷
基金：
美国国家科学基金会;
关键词：
Metal-matrix composites (MMCs); Particle-reinforcement; Microstructures; Sintering; WALLED CARBON NANOTUBES; ALUMINUM-MATRIX COMPOSITES; MECHANICAL-PROPERTIES; THERMAL-PROPERTIES; POWDER-METALLURGY; WEAR; BEHAVIOR; DISPERSION; STRENGTH; FRICTION;
D O I：
10.1016/j.compositesb.2013.12.043
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A 1.0 wt.% graphene reinforced aluminum 6061 (Al6061) composite was synthesized to investigate the effects of graphene dispersion by ball milling technique. The Al6061 powder and graphene were ball milled at different milling times. The composites were then synthesized by hot compaction in the semi-solid regime of the Al6061. A three point bending test was performed to characterize the mechanical properties of the composite. The ball milled powder and the fracture surfaces of the composites were analyzed using the scanning electron microscopy. A maximum enhancement of 47% in flexural strength was observed when compared with the reference Al6061 processed at the same condition. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：111 / 118
页数：8
相关论文
共 50 条
  • [31] Influence of B4C/BN on solid particle erosion of Al6061 metal matrix hybrid composites fabricated through powder metallurgy technique
    Chand, Sudipta
    Chandrasekhar, Polymersetty
    CERAMICS INTERNATIONAL, 2020, 46 (11) : 17621 - 17630
  • [32] INVESTIGATING SINTERING BEHAVIOR OF THE GRAPHENE NANOPLATELETS (GNPs) REINFORCED ALUMINUM NANOCOMPOSITES VIA LOW ENERGY SOLUTION BALL MILLING
    Baig, Zeeshan
    Mamat, Othman
    Mustapha, Mazli
    Ali, Sadaqat
    ARCHIVES OF METALLURGY AND MATERIALS, 2020, 65 (02) : 755 - 759
  • [33] Sintering behavior of Al-AlN-nanostructured composite powder synthesized by high-energy ball milling
    Abdoli, Hamid
    Asgharzadeh, Hamed
    Salahi, Esmail
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 473 (1-2) : 116 - 122
  • [34] X-ray Computed Microtomography Characterization of Ti6Al4V/CoCrMo Biomedical Composite Fabricated by Semi-solid Sintering
    Mihalcea, E.
    Vergara-Hernandez, H. J.
    Olmos, L.
    Jimenez, O.
    Arteaga, D.
    Salgado-Lopez, J. M.
    JOURNAL OF NONDESTRUCTIVE EVALUATION, 2021, 40 (01)
  • [35] Bimodal titanium alloys with ultrafine lamellar eutectic structure fabricated by semi-solid sintering
    Yang, C.
    Kang, L. M.
    Li, X. X.
    Zhang, W. W.
    Zhang, D. T.
    Fu, Z. Q.
    Li, Y. Y.
    Zhang, L. C.
    Lavernia, E. J.
    ACTA MATERIALIA, 2017, 132 : 491 - 502
  • [36] Dry Sliding Wear Behavior of Graphite Particulate Reinforced Al6061 Alloy Composite Materials
    Nagaral, Madeva
    Auradi, V.
    Kori, S. A.
    DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 170 - +
  • [37] Tensile Properties and Plasticity of Semi-Solid Cast 6061 Al Alloy at Elevated Temperatures
    Songkuea, Sukrit
    Sripan, Patcharee
    Wisutmethangoon, Sirikul
    Wannasin, Jessada
    Plookphol, Thawatchai
    FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE IV, PTS 1-5, 2014, 496-500 : 366 - +
  • [38] Exploring the Interfacial Microstructure Evolution and Bonding Properties of Al/Steel Composite Plates Fabricated Through Semi-Solid Cast-Rolling
    Qiu, Jin
    Li, Yuandong
    Zhou, Hongwei
    Bi, Guangli
    METALS, 2025, 15 (02)
  • [39] A comparative study on microstructural evolution and surface properties of graphene/CNT reinforced Al6061-SiC hybrid surface composite fabricated via friction stir processing
    Sharma, Abhishek
    Sharma, Vyas Mani
    Paul, Jinu
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2019, 29 (10) : 2005 - 2026
  • [40] Effect of ball-milling and graphene contents on the mechanical properties and fracture mechanisms of graphene nanosheets reinforced copper matrix composites
    Yue, Hongyan
    Yao, Longhui
    Gao, Xin
    Zhang, Shaolin
    Guo, Erjun
    Zhang, Hong
    Lin, Xuanyu
    Wang, Bao
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 691 : 755 - 762
12345