Effect of ball milling on graphene reinforced Al6061 composite fabricated by semi-solid sintering

被引：351
|
作者：
Bastwros, Mina [1 ]
Kim, Gap-Yong [1 ]
Zhu, Can [1 ]
Zhang, Kun [2 ]
Wang, Shiren [2 ]
Tang, Xiaoduan [1 ]
Wang, Xinwei [1 ]
机构：
[1] Iowa State Univ, Dept Mech Engn, Ames, IA 50011 USA
[2] Texas Tech Univ, Dept Ind Engn, Lubbock, TX 79409 USA
来源：
COMPOSITES PART B-ENGINEERING | 2014年 / 60卷
基金：
美国国家科学基金会;
关键词：
Metal-matrix composites (MMCs); Particle-reinforcement; Microstructures; Sintering; WALLED CARBON NANOTUBES; ALUMINUM-MATRIX COMPOSITES; MECHANICAL-PROPERTIES; THERMAL-PROPERTIES; POWDER-METALLURGY; WEAR; BEHAVIOR; DISPERSION; STRENGTH; FRICTION;
D O I：
10.1016/j.compositesb.2013.12.043
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A 1.0 wt.% graphene reinforced aluminum 6061 (Al6061) composite was synthesized to investigate the effects of graphene dispersion by ball milling technique. The Al6061 powder and graphene were ball milled at different milling times. The composites were then synthesized by hot compaction in the semi-solid regime of the Al6061. A three point bending test was performed to characterize the mechanical properties of the composite. The ball milled powder and the fracture surfaces of the composites were analyzed using the scanning electron microscopy. A maximum enhancement of 47% in flexural strength was observed when compared with the reference Al6061 processed at the same condition. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：111 / 118
页数：8
相关论文
共 50 条
  • [21] The effect of induction heat treatment on mechanical and tribological properties of Si3N4 and graphene reinforced Al6061 matrix composites
    Senel, Mahmut Can
    Taskin, Aleyna
    Demir, Mehmethan
    Gurbuz, Mevlut
    JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2024, 39 (03): : 1567 - 1581
  • [22] Wear Behavior of the Uniformly Dispersed Carbon Nanotube Reinforced 6061Al Composite Fabricated by Milling Combined with Powder Metallurgy
    Xiaonan Li
    Zhenyu Liu
    Zhixin Dai
    Hui Feng
    Bolyu Xiao
    Dingrui Ni
    Quanzhao Wang
    Dong Wang
    Zongyi Ma
    Acta Metallurgica Sinica (English Letters), 2022, 35 : 1765 - 1776
  • [23] FABRICATION OF AL6061-CNT COMPOSITE BY MECHANICAL ALLOYING FOLLOWED BY SEMI-SOLID POWDER PROCESSING
    Wu, Yufeng
    Kim, Gap-Yong
    PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE 2010, VOL 2, 2011, : 399 - 403
  • [24] Effect of graphene nanoplatelets on the physical and mechanical properties of Al6061 in fabricated and T6 thermal conditions
    Khan, Mahmood
    Din, Rafi Ud
    Wadood, Abdul
    Syed, Wilayat Husain
    Akhtar, Shahid
    Aune, Ragnhild Elizabeth
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 790 : 1076 - 1091
  • [25] Effect of Hot Extrusion on Microstructure and Properties of (ABOw+SiCp)/6061Al Composites Fabricated by Semi-solid Stirring Technique
    关丽娜
    耿林
    Journal of Wuhan University of Technology(Materials Science), 2009, (S1) : 13 - 16
  • [26] Enhanced microstructure and mechanical properties of Al6061 alloy via graphene nanoplates reinforcement fabricated by stir casting
    Awate, Pankaj P.
    Barve, Shivprakash B.
    FUNCTIONAL COMPOSITES AND STRUCTURES, 2022, 4 (01):
  • [27] Spark plasma sintering of boron carbide reinforced aluminum alloy (Al6061) matrix composites
    Khan, Mahmood
    Ud-Din, Rafi
    Syed, Wilayat Husain
    Akhtar, Shahid
    Aune, Ragnhild Elizabeth
    PROCEEDINGS OF 2019 16TH INTERNATIONAL BHURBAN CONFERENCE ON APPLIED SCIENCES AND TECHNOLOGY (IBCAST), 2019, : 35 - 41
  • [28] Effect of ball milling on the mechanical properties and crystallization of graphene nanoplatelets reinforced short chain branched-polyethylene
    Kourtidou, Dimitra
    Grigora, Maria Eirini
    Tsongas, Konstantinos
    Terzopoulou, Zoe
    Tzetzis, Dimitrios
    Bikiaris, Dimitrios N.
    Chrissafis, Konstantinos
    JOURNAL OF APPLIED POLYMER SCIENCE, 2021, 138 (35)
  • [29] Fabrication and Characteristics of (ABOw plus SiCp)/6061Al Composite by Semi-Solid Mechanical Stirring Technique
    Guan, Lina
    Fan, Guohua
    Geng, Lin
    Feng, Yicheng
    Zhang, Hongwei
    JOURNAL OF COMPUTATIONAL AND THEORETICAL NANOSCIENCE, 2012, 9 (09) : 1260 - 1263
  • [30] Preparation and mechanical properties of SiC-reinforced Al6061 composite by mechanical alloying
    Parvin, N.
    Assadifard, R.
    Safarzadeh, P.
    Sheibani, S.
    Marashi, R.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 492 (1-2): : 134 - 140
12345