Effect of ball milling on graphene reinforced Al6061 composite fabricated by semi-solid sintering

被引：357

作者：

Bastwros, Mina ^{[1
]}

Kim, Gap-Yong ^{[1
]}

Zhu, Can ^{[1
]}

Zhang, Kun ^{[2
]}

Wang, Shiren ^{[2
]}

Tang, Xiaoduan ^{[1
]}

Wang, Xinwei ^{[1
]}

机构：

[1] Iowa State Univ, Dept Mech Engn, Ames, IA 50011 USA

[2] Texas Tech Univ, Dept Ind Engn, Lubbock, TX 79409 USA

来源：

COMPOSITES PART B-ENGINEERING | 2014年 / 60卷

基金：

美国国家科学基金会;

关键词：

Metal-matrix composites (MMCs); Particle-reinforcement; Microstructures; Sintering; WALLED CARBON NANOTUBES; ALUMINUM-MATRIX COMPOSITES; MECHANICAL-PROPERTIES; THERMAL-PROPERTIES; POWDER-METALLURGY; WEAR; BEHAVIOR; DISPERSION; STRENGTH; FRICTION;

D O I：

10.1016/j.compositesb.2013.12.043

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A 1.0 wt.% graphene reinforced aluminum 6061 (Al6061) composite was synthesized to investigate the effects of graphene dispersion by ball milling technique. The Al6061 powder and graphene were ball milled at different milling times. The composites were then synthesized by hot compaction in the semi-solid regime of the Al6061. A three point bending test was performed to characterize the mechanical properties of the composite. The ball milled powder and the fracture surfaces of the composites were analyzed using the scanning electron microscopy. A maximum enhancement of 47% in flexural strength was observed when compared with the reference Al6061 processed at the same condition. (C) 2013 Elsevier Ltd. All rights reserved.

引用

页码：111 / 118

页数：8

共 46 条

[1] Development of CNT/Si3N4 composites with improved mechanical and electrical properties [J].