Mechanical Properties of Porous Si3N4 Ceramics

被引：1
|
作者：
Kasiarova, Monika [1 ]
Vilcekova, Zuzana [1 ]
Bodisova, Katarina [2 ]
Domanicka, Magdalena [2 ]
Hnatko, Miroslav [2 ]
Dusza, Jan [1 ]
Sajgalik, Pavol [2 ]
Gromosova, Sylvia [3 ,4 ]
机构：
[1] Slovak Acad Sci, Inst Mat Res, Watsonova 47, Kosice, Slovakia
[2] Slovak Acad Sci, Inst Inorgan Chem, Kosice, Slovakia
[3] Safarik Univ, Fac Med, Associated Tissue Bank, Kosice, Slovakia
[4] L Pasteur Fac Hosp, Fac Med, Kosice, Slovakia
来源：
LOCAL MECHANICAL PROPERTIES IX | 2014年 / 586卷
关键词：
silicon nitride; porous ceramics; nanohardness; elastic modulus; trabecular bone; ELASTIC-MODULUS; NANOINDENTATION; INDENTATION; HARDNESS; LOAD;
D O I：
10.4028/www.scientific.net/KEM.586.166
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Mechanical properties of porous silicon nitride prepared by two different processing routes have been studied. Depth sensing indentation was used to measure the hardness and Young's modulus of experimental materials. The results were compared with the hardness and Young's modulus of trabecular bone in order to find out porous ceramics with properties close to that of trabecular bone. Material prepared by the infiltration of polyurethane sponge exhibited properties close to the properties of bone and it is potential material for further investigation in the bio-application field.
引用
收藏
页码：166 / +
页数：2
相关论文
共 50 条
  • [1] Effects of β-Si3N4 Seeds Addition on Microstructure and Mechanical Properties of Porous Si3N4 Ceramics
    Yu, Fang-li
    Bai, Yu
    Du, Jun
    Yu, Ping-ping
    Wang, Jian-zhi
    Yang, Jian-feng
    ECO-MATERIALS PROCESSING AND DESIGN XIII, 2012, 724 : 201 - +
  • [2] Fabrication and mechanical properties of porous Si3N4 ceramics prepared via SHS
    Zhang, Ye
    Yao, Dongxu
    Zuo, Kaihui
    Xia, Yongfeng
    Yin, Jinwei
    Liang, Hanqin
    Zeng, Yu-Ping
    CERAMICS INTERNATIONAL, 2019, 45 (12) : 14867 - 14872
  • [3] Mechanical properties of Si3N4 + β-Si3N4 whisker reinforced ceramics
    Dusza, J.
    Sajgalik, P.
    Journal of the European Ceramic Society, 1992, 9 (01) : 9 - 17
  • [4] The effect of oxidation on the mechanical properties and dielectric properties of porous Si3N4 ceramics
    Liang, Hanqin
    Zeng, Yuping
    Zuo, Kaihui
    Xia, Xiongfeng
    Yao, Dongxu
    Yin, Jinwei
    CERAMICS INTERNATIONAL, 2017, 43 (07) : 5517 - 5523
  • [5] Preparation and Properties of High Strength Porous Si3N4 Ceramics
    Yu Lei
    Wang Chang'an
    Dong Wei
    Sun Jialin
    Huang Yong
    OuYang Shixi
    RARE METAL MATERIALS AND ENGINEERING, 2011, 40 : 547 - 550
  • [6] Effects of pore morphology on the fabrication and mechanical properties of porous Si3N4 ceramics
    Yang, JF
    Gao, JQ
    Zhang, GJ
    Hayashi, I
    Ohji, T
    HIGH-PERFORMANCE CERAMICS III, PTS 1 AND 2, 2005, 280-283 : 1231 - 1235
  • [7] The effect of fabrication parameters on the mechanical properties of sintered reaction bonded porous Si3N4 ceramics
    Yao, Dongxu
    Xia, Yongfeng
    Zuo, Kai-Hui
    Jiang, Dongliang
    Giinster, Jens
    Zeng, Yu-Ping
    Heinrich, Jurgen G.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2014, 34 (15) : 3461 - 3467
  • [8] Microstructure and mechanical properties of porous Si3N4 ceramics prepared by freeze-casting
    Xia, Yongfeng
    Zeng, Yu-Ping
    Jiang, Dongliang
    MATERIALS & DESIGN, 2012, 33 : 98 - 103
  • [9] Mechanical and dielectric properties of porous Si3N4 ceramics using PMMA as pore former
    Xia, Yongfeng
    Zeng, Yu-Ping
    Jiang, Dongliang
    CERAMICS INTERNATIONAL, 2011, 37 (08) : 3775 - 3779
  • [10] High temperature mechanical properties of Si3N4/BN laminated ceramics
    Li, CW
    Wang, CG
    Huang, Y
    RARE METAL MATERIALS AND ENGINEERING, 2003, 32 : 348 - 351
12345