Micromechanical modeling of thermal expansion coefficients for unidirectional glass fiber-reinforced polyimide composites containing silica nanoparticles

被引:70
作者
Hassanzadeh-Aghdam, M. K. [1 ]
Ansari, R. [1 ]
Darvizeh, A. [1 ,2 ]
机构
[1] Univ Guilan, Dept Mech Engn, POB 3756, Rasht, Iran
[2] Islamic Azad Univ, Dept Mech Engn, Bandar Anzali Branch, Bandar Anzali, Iran
关键词
Nanoparticles; Polymer-matrix composites (PMCs); Thermal properties; Micro-mechanics; FINITE-ELEMENT-METHOD; MECHANICAL-PROPERTIES; THERMOELASTIC PROPERTIES; ELASTIC PROPERTIES; MODIFIED MATRICES; RUBBER PARTICLES; NANOCOMPOSITES; INTERPHASE; EPOXY; TOUGHNESS;
D O I
10.1016/j.compositesa.2017.02.015
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The coefficients of thermal expansion (CTEs) of unidirectional glass fiber-reinforced polyimide composites containing silica nanoparticles are investigated. To this end, a three-dimensional unit cell-based micromechanical model together with an individual representative volume element (RVE) with c x r x h sub-cells is proposed. The interphase region between silica nanoparticle and polyimide matrix is considered as an equivalent solid continuum. Comparisons are made between the results of present model with those of available cylinder model and experiment. The results reveal that with adding silica nanoparticles to glass fiber-reinforced polyimide composites, the transverse CTE of composite decreases, while its longitudinal CTE increases, The effects of fiber volume fraction and aspect ratio, interphase thickness and material properties, silica nanoparticle volume fraction and diameter on the thermal expansion "behavior of silica nanoparticle-glass fiber-reinforced polyimide composites are studied. The obtained results could be useful to guide the design of composites with optimal CTEs. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码:110 / 121
页数:12
相关论文
共 45 条
[1]   Micromechanics-based viscoelastic analysis of carbon nanotube-reinforced composites subjected to uniaxial and biaxial loading [J].
Ansari, R. ;
Aghdam, M. K. Hassanzadeh .
COMPOSITES PART B-ENGINEERING, 2016, 90 :512-522
[2]   A comprehensive closed form micromechanics model for estimating the elastic modulus of nanotube-reinforced composites [J].
Anumandla, Vijay ;
Gibson, Ronald F. .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2006, 37 (12) :2178-2185
[3]   Mechanical properties of hybrid composites using finite element method based micromechanics [J].
Banerjee, Sayan ;
Sankar, Bhavani V. .
COMPOSITES PART B-ENGINEERING, 2014, 58 :318-327
[4]   Pseudo-percolation: Critical volume fractions and mechanical percolation in polymer nanocomposites [J].
Baxter, Sarah C. ;
Robinson, Christopher T. .
COMPOSITES SCIENCE AND TECHNOLOGY, 2011, 71 (10) :1273-1279
[5]   Micromechanics-based modelling of stiffness and yield stress for silica/polymer nanocomposites [J].
Boutaleb, S. ;
Zairi, F. ;
Mesbah, A. ;
Nait-Abdelaziz, M. ;
Gloaguen, J. M. ;
Boukharouba, T. ;
Lefebvre, J. M. .
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2009, 46 (7-8) :1716-1726
[6]   Investigation of electromechanical properties of piezoelectric structural fiber composites with micromechanics analysis and finite element modeling [J].
Dai, Qingli ;
Ng, Kenny .
MECHANICS OF MATERIALS, 2012, 53 :29-46
[7]   The research on the effect of SiO2 and CF on the tensile and tribological properties of PI composite [J].
Du Gang ;
Cai Chilan ;
Tian Haobin ;
Li Zhenhua ;
Zhang Dingzhong ;
Qi Kang .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2015, 229 (12) :1513-1518
[8]  
FARSADI M, 2012, J COMPOS MATER, V47, P1325
[9]   Effect of colloidal silica on the strength and energy absorption of glass fiber/epoxy interphases [J].
Gao, X. ;
Jensen, R. E. ;
McKnight, S. H. ;
Gillespie, J. W., Jr. .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2011, 42 (11) :1738-1747
[10]   Numerical simulation of the effects of volume fraction, aspect ratio and fibre length distribution on the elastic and thermoelastic properties of short fibre composites [J].
Hine, PJ ;
Lusti, HR ;
Gusev, AA .
COMPOSITES SCIENCE AND TECHNOLOGY, 2002, 62 (10-11) :1445-1453