The effect of lubrication on mill loads during hot rolling of low carbon steel strips

被引：35

作者：

Shirizly, A ^{[1
]}

Lenard, JG ^{[1
]}

机构：

[1] Univ Waterloo, Dept Engn Mech, Waterloo, ON N2L 3G1, Canada

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2000年 / 97卷 / 1-3期

基金：

加拿大自然科学与工程研究理事会;

关键词：

lubrication; hot rolling; steel strips;

D O I：

10.1016/S0924-0136(99)00339-8

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Hot rolling experiments have been conducted, using low carbon steel strips. The effects of water, oil/water emulsions, neat oil and dry conditions at the roll/strip surface, on the resulting loads and temperatures were examined. The 1 : 1000 oil-to-water mix appeared to lower the mill loads the most. Doubling the oil volume was found to have a deleterious effect and did not create any further load reductions. (C) 2000 Elsevier Science S.A. All rights reserved.

引用

页码：61 / 68

页数：8

共 21 条

[1] Temperature changes in hot flat rolling of steels at low strain rates and low reduction [J].

Aiyedun, PO ;

Sparling, LGM ;

Sellars, CM .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 1997, 211 (04) :261-284

[2]

Blazevic DT, 1996, ISS MWSP CONF P, V33, P33

[3] FUNDAMENTAL PHENOMENA GOVERNING HEAT-TRANSFER DURING ROLLING [J].

CHEN, WC ;

SAMARASEKERA, IV ;

HAWBOLT, EB .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1993, 24 (06) :1307-1320

[4] THE THERMAL AND METALLURGICAL STATE OF STEEL STRIP DURING HOT-ROLLING .1. CHARACTERIZATION OF HEAT-TRANSFER [J].

DEVADAS, C ;

SAMARASEKERA, IV ;

HAWBOLT, EB .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1991, 22 (02) :307-319

[5]

JARL M, 1993, P 1 INT C MOD ROLL P, P614

[6]

KARAGIOZIS AN, 1988, ASME, V110, P17

[7]

Kawai N., 1984, ADV TECHNOLOGY PLAST, VI, P145

[8]

KEUNG WC, 1975, P 3 N AM MET WORK RE

[9] ROLL-BITE DEFORMATION DURING THE HOT-ROLLING OF STEEL STRIP [J].

KUMAR, A ;

SAMARASEKERA, IV ;

HAWBOLT, EB .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1992, 30 (01) :91-114

[10] THE INFLUENCE OF SCALE ON FRICTION IN HOT METAL WORKING [J].

LUONG, LHS ;

HEIJKOOP, T .

WEAR, 1981, 71 (01) :93-102

← 1 2 3 →