A Modified Method for Shear Strength Measurement of Adhesive Bonds in Solid Wood

被引：0

作者：

Derikvand, Mohammad ^{[1
]}

Pangh, Halimeh ^{[2
]}

机构：

[1] Islamic Azad Univ, Andimeshk Branch, Young Researchers & Elite Club, Andimeshk, Iran

[2] Univ Tehran, Dept Wood & Paper Sci & Technol, Coll Agr & Nat Resources, Karaj, Iran

来源：

BIORESOURCES | 2016年 / 11卷 / 01期

关键词：

Adhesive bond strength; Lap joints; Polyurethane; Polyvinyl acetate; Shear test; Urea-formaldehyde; Wood adhesives; Wood shear failure; LAP JOINT; POLYURETHANE;

D O I：

暂无

中图分类号：

TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];

学科分类号：

0805 ; 080502 ; 0822 ;

摘要：

An experimental method was developed in this investigation to evaluate the shear strength of adhesive bonds in solid wood materials. The new method was tested against the standard test methods described in ASTM D-905, EN 205, and EN 302-1. Specimens were constructed of Oriental Beech (Fagus orientalis L.) and bonded with three different wood adhesives. Using the proposed method in the study, unintentional errors in cutting and testing processes of the shear specimens were decreased, which led to a decrease in the variability of the results. The worst stability was observed in the data obtained when the EN 205 and ASTM D-905 standard methods were used.

引用

页码：354 / 364

页数：11

共 50 条

[21] Shear Strength, Adhesive Shear Strength and Joint Compressive Strength
Siech, Hans Joachim
MAUERWERK, 2008, 12 (06) : 340 - +
[22] The significance of lap-shear testing of wood adhesive bonds by means of Volkersen's shear lag model
Gindl-Altmutter, W.
Mueller, U.
Konnerth, J.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, 2012, 70 (06) : 903 - 905
[23] Shear Strength of Eucalyptus saligna Wood Joints Bonded with Polyvinyl Acetate Adhesive
Biazzon, Joao C.
Lima Jr, Mauri P.
Munis, Rafaele A.
De Araujo, Victor A.
Morales, Elen A. M.
Goncalves, Marcos T. T.
Bueno, Marcus A. P.
Moizes, Fabio A.
Leite, Sueli S.
Salvadeo, Vitor M.
Archangelo, Andreia
Nasser, Silvia M.
Eugenio, Rafael A. P.
Pereira, Luiz E. R.
Celestino, Valter R. B.
Valarelli, Ivaldo D.
BIORESOURCES, 2019, 14 (02) : 4590 - 4602
[24] SHEAR BOND STRENGTH OF BLACK LOCUST WOOD GLUED WITH THREE ADHESIVE SYSTEMS
Voulgaridis, Elias
Passialis, Costas
Negri, Martino
Adamopoulos, Stergios
WOOD RESEARCH, 2012, 57 (03) : 489 - 496
[25] SHEAR STRENGTH OF ADHESIVE JOINTS PRODUCED WITH THREE DIFFERENT WOOD SPECIES AND VINYLIC ADHESIVE FOR NONSTRUCTURAL APPLICATIONS
Oliveira, Mauricio Pinheiro
Seraphim, Lucas Fiorelli
REVISTA ARVORE, 2015, 39 (02): : 375 - 384
[26] Influence of pressure on the radial and tangential penetration of adhesive resin into poplar wood and on the shear strength of adhesive joints
Gavrilović-Grmuša I.
Dunky M.
Djiporović-Momčilović M.
Popović M.
Popović J.
Gavrilović-Grmuša, Ivana (ivana.grmusa@sfb.bg.ac.rs), 1600, North Carolina State University (11): : 2238 - 2255
[27] Influence of Pressure on the Radial and Tangential Penetration of Adhesive Resin into Poplar Wood and on the Shear Strength of Adhesive Joints
Gavrilovic-Grmusa, Ivana
Dunky, Manfred
Djiporovic-Momcilovic, Milanka
Popovic, Mladjan
Popovic, Jasmina
BIORESOURCES, 2016, 11 (01): : 2238 - 2255
[28] Analysis of a modified microbond test for the measurement of interfacial shear strength of an aqueous-based adhesive and a polyamide fibre
Liu, Zheng
Yuan, Xinhua
Beck, Alison J.
Jones, Frank R.
COMPOSITES SCIENCE AND TECHNOLOGY, 2011, 71 (13) : 1529 - 1534
[29] Shear and Bending Strength of SiC/SiC Joined by a Modified Commercial Adhesive
Salvo, Milena
Rizzo, Stefano
Casalegno, Valentina
Ferraris, Monica
Handrick, Karin
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2012, 9 (04) : 778 - 785
[30] Chemically Modified Soluble Sodium Silicate as an Adhesive for Solid Wood Panels
Suleman, Y. H.
Hamid, E. M.-S.
Mokuzai Gakkaishi/Journal of the Japan Wood Research Society, 43 (10): : 855 - 860

← 1 2 3 4 5 →