A Modified Method for Shear Strength Measurement of Adhesive Bonds in Solid Wood

被引：0
|
作者：
Derikvand, Mohammad [1 ]
Pangh, Halimeh [2 ]
机构：
[1] Islamic Azad Univ, Andimeshk Branch, Young Researchers & Elite Club, Andimeshk, Iran
[2] Univ Tehran, Dept Wood & Paper Sci & Technol, Coll Agr & Nat Resources, Karaj, Iran
来源：
BIORESOURCES | 2016年 / 11卷 / 01期
关键词：
Adhesive bond strength; Lap joints; Polyurethane; Polyvinyl acetate; Shear test; Urea-formaldehyde; Wood adhesives; Wood shear failure; LAP JOINT; POLYURETHANE;
D O I：
暂无
中图分类号：
TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];
学科分类号：
0805 ; 080502 ; 0822 ;
摘要：
An experimental method was developed in this investigation to evaluate the shear strength of adhesive bonds in solid wood materials. The new method was tested against the standard test methods described in ASTM D-905, EN 205, and EN 302-1. Specimens were constructed of Oriental Beech (Fagus orientalis L.) and bonded with three different wood adhesives. Using the proposed method in the study, unintentional errors in cutting and testing processes of the shear specimens were decreased, which led to a decrease in the variability of the results. The worst stability was observed in the data obtained when the EN 205 and ASTM D-905 standard methods were used.
引用
收藏
页码：354 / 364
页数：11
相关论文
共 50 条
  • [1] Characterization of wood-adhesive bonds in wet conditions by means of nanoindentation and tensile shear strength
    Bockel, Stefan
    Harling, S.
    Groenquist, P.
    Niemz, P.
    Pichelin, F.
    Weiland, G.
    Konnerth, Johannes
    EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, 2020, 78 (03) : 449 - 459
  • [2] Characterization of wood-adhesive bonds in wet conditions by means of nanoindentation and tensile shear strength
    Stefan Bockel
    S. Harling
    P. Grönquist
    P. Niemz
    F. Pichelin
    G. Weiland
    Johannes Konnerth
    European Journal of Wood and Wood Products, 2020, 78 : 449 - 459
  • [3] Shear Modulus and Shear Strength Evaluation of Solid Wood by a Modified ISO 15310 Square-Plate Twist Method
    Yoshihara, Hiroshi
    DRVNA INDUSTRIJA, 2012, 63 (01) : 51 - 55
  • [4] A numerical study of the shear-strength-predicting capabilities of test specimens for wood-adhesive bonds
    Serrano, E
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2004, 24 (01) : 23 - 35
  • [5] A numerical study of the shear-strength-predicting capabilities of test specimens for wood-adhesive bonds
    Serrano, E. (erik.serrano@byggmek.lth.se), 1600, Elsevier Ltd (24):
  • [6] Shear strength of wood to wood adhesive based on palm kernel oil
    Badri, Khairiah Haji
    Ujar, Ahmad Helmi
    Othman, Zulkefly
    Sahaldin, Fadhlina Hani
    Journal of Applied Polymer Science, 2006, 100 (03): : 1759 - 1764
  • [7] Shear strength of wood to wood adhesive based on palm kernel oil
    Badri, KH
    Ujar, AH
    Othman, Z
    Sahaldin, FH
    JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 100 (03) : 1759 - 1764
  • [8] MEASUREMENT OF SHEAR STRENGTH OF ADHESIVE JOINTS IN TORSION
    BRYANT, RW
    DUKES, WA
    BRITISH JOURNAL OF APPLIED PHYSICS, 1965, 16 (01): : 101 - &
  • [9] Influence of growth ring angle, adhesive system and viscosity on the shear strength of adhesive bonds
    Hass, Philipp
    Muller, Christian
    Clauss, Sebastian
    Niemz, Peter
    WOOD MATERIAL SCIENCE & ENGINEERING, 2009, 4 (3-4) : 140 - 146
  • [10] Tensile Shear Strength of Wood Adhesive from Recycled Polystyrene
    Jasri, M. A. H. M.
    Afendi, M.
    Nik, N. Z.
    Izzawati, B.
    Nurhashima, S.
    Nor, A.
    Yahud, S.
    Amin, N. A. M.
    Mechanical and Materials Engineering, 2014, 554 : 3 - 6
12345