Experimental validation of a pilot membrane reactor for hydrogen production by solar steam reforming of methane at maximum 550 ° C using molten salts as heat transfer fluid

被引:34
作者
Giaconia, Alberto [1 ]
Iaquaniello, Gaetano [2 ]
Caputo, Giampaolo [1 ]
Morico, Barbara [3 ]
Salladini, Annarita [3 ]
Turchetti, Luca [1 ]
Monteleone, Giulia [1 ]
Giannini, Antonella [1 ]
Palo, Emma [2 ]
机构
[1] ENEA Italian Natl Agcy New Technol Energy & Susta, Via Anguillarese 301, I-00123 Rome, Italy
[2] KT Kinet Technol SpA, Viale Castello Magliana 27, I-00148 Rome, Italy
[3] NextChem SpA, Via Vannina 88, I-00156 Rome, Italy
关键词
Hydrogen production; Steam methane reforming; Solar reforming; Membrane reactor; Pd-based membrane; Molten salt; CONVERTING NATURAL-GAS; CATALYSTS;
D O I
10.1016/j.ijhydene.2020.09.070
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
An innovative steam reformer for hydrogen production at temperatures lower than 550 degrees C has been developed in the EU project CoMETHy (Compact Multifuel-Energy To Hydrogen converter). The steam reforming process has been specifically tailored and re-designed to be combined with Concentrating Solar plants using "solar salts": a low-temperature steam reforming reactor was developed, operating at temperatures up to 550 degrees C, much lower than the traditional process (usually 850 degrees C). This result was obtained after extensive research, going from the development of basic components (catalysts and membranes) to their integration in an innovative membrane reformer heated with molten salts, where both hydrogen production and purification occur in a single stage. The reduction of process temperatures is achieved by applying advanced catalyst systems and hydrogen selective Pd-based membranes. Process heat is supplied by using a low-cost and environmentally friendly binary NaNO3/KNO3 liquid mixture (60/40 w/w) as heat transfer fluid; such mixture is commonly used for the same purpose in the concentrating solar industry, so that the process can easily be coupled with concentrating solar power (CSP) plants for the supply of renewable process heat. This paper deals with the successful operation and validation of a pilot scale reactor with a nominal capacity of 2 Nm3/h of pure hydrogen from methane. The plant was operated with molten salt circulation for about 700 h, while continuous operation of the reactor was achieved for about 150 h with several switches of operating conditions such as molten salts inlet temperature, sweep steam flow rate and steam-to-carbon feed ratio. The results obtained show that the membrane reformer allows to achieve twice as high a conversion compared to a conventional reformer operating at thermodynamic equilibrium under the same conditions considered in this paper. A highly pure hydrogen permeate stream was obtained (>99.8%), while the outlet retentate stream had low CO concentration (<2%). No macroscopic signs of reactor performance loss were observed over the experimental operation period. (c) 2020 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:33088 / 33101
页数:14
相关论文
共 34 条
  • [1] State-of-the-art catalysts for CH4 steam reforming at low temperature
    Angeli, Sofia D.
    Monteleone, Giulia
    Giaconia, Alberto
    Lemonidou, Angeliki A.
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2014, 39 (05) : 1979 - 1997
  • [2] Design and optimisation of linear Fresnel power plants based on the direct molten salt concept
    Bachelier, Camille
    Stieglitz, Robert
    [J]. SOLAR ENERGY, 2017, 152 : 171 - 192
  • [3] Membrane reforming in converting natural gas to hydrogen (part one)
    Barbaa, D.
    Giacobbe, F.
    De Cesaris, A.
    Farace, A.
    Iaquaniellob, G.
    Pipino, A.
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2008, 33 (14) : 3700 - 3709
  • [4] Experimental tests on steam reforming of natural gas in a reformer and membrane modules (RMM) plant
    De Falco, M.
    Iaquaniello, G.
    Salladini, A.
    [J]. JOURNAL OF MEMBRANE SCIENCE, 2011, 368 (1-2) : 264 - 274
  • [5] Reformer and Membrane Modules for Methane Conversion: Experimental Assessment and Perspectives of an Innovative Architecture
    De Falco, Marcello
    Salladini, Annarita
    Iaquaniello, Gaetano
    [J]. CHEMSUSCHEM, 2011, 4 (08) : 1157 - 1165
  • [6] Effects Assessment of 10 Functioning Years on the Main Components of the Molten Salt PCS Experimental Facility of ENEA
    Gaggioli, Walter
    Di Ascenzi, Primo
    Rinaldi, Luca
    Tarquini, Pietro
    Fabrizi, Fabrizio
    [J]. SOLARPACES 2015: INTERNATIONAL CONFERENCE ON CONCENTRATING SOLAR POWER AND CHEMICAL ENERGY SYSTEMS, 2016, 1734
  • [7] Multi-fuelled solar steam reforming for pure hydrogen production using solar salts as heat transfer fluid
    Giaconia, A.
    Monteleone, G.
    Morico, B.
    Salladini, A.
    Shabtai, K.
    Sheintuch, M.
    Boettge, D.
    Adler, J.
    Palma, V.
    Voutetakis, S.
    Lemonidou, A.
    Annesini, M. C.
    den Exter, M.
    Balzer, H.
    Turchetti, L.
    [J]. INTERNATIONAL CONFERENCE ON CONCENTRATING SOLAR POWER AND CHEMICAL ENERGY SYSTEMS, SOLARPACES 2014, 2015, 69 : 1750 - 1758
  • [8] Solar steam reforming of natural gas for hydrogen production using molten salt heat carriers
    Giaconia, Alberto
    de Falco, Marcello
    Caputo, Giampaolo
    Grena, Roberto
    Tarquini, Pietro
    [J]. AICHE JOURNAL, 2008, 54 (07) : 1932 - 1944
  • [9] Development of a Solar-Powered, Fuel-Flexible Compact Steam Reformer: The CoMETHy Project
    Giaconia, Alberto
    Turchetti, Luca
    Monteleone, Giulia
    Morico, Barbara
    Iaquaniello, Gaetano
    Shabtai, Keren
    Sheintuch, Moshe
    Boettge, Daniella
    Adler, Joerg
    Palma, Vicenzo
    Voutetakis, Spyros
    Lemonidou, Angela
    Annesini, Maria Christina
    den Exter, Marcel
    Balzer, Harald
    [J]. 16TH INTERNATIONAL CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION (PRES'13), 2013, 35 : 433 - 438
  • [10] Solar linear Fresnel collector using molten nitrates as heat transfer fluid
    Grena, Roberto
    Tarquini, Pietro
    [J]. ENERGY, 2011, 36 (02) : 1048 - 1056