Investigation of the effects of ultrasonic assisted drilling on tool wear and optimization of drilling parameters

被引：34
作者：
Yarar, Eser [1 ]
Karabay, Sedat [1 ]
机构：
[1] Kocaeli Univ, Dept Mech Engn, Kocaeli, Turkey
来源：
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY | 2020年 / 31卷
关键词：
Ultrasonic assisted drilling; Cutting force; Tool wear; Surface roughness; Built-up edge; Multi-response optimization; RESPONSE-SURFACE METHODOLOGY; CUTTING PARAMETERS; TAGUCHI DESIGN; BURR SIZE; TEMPERATURE; ROUGHNESS; PERFORMANCE; MACHINABILITY; THRUST; MODEL;
D O I：
10.1016/j.cirpj.2020.06.002
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, ultrasonic-assisted drilling was performed on different heat-treated (T6, T1) AA6061 to investigate the effects of cutting parameters on forces, surface roughness, and tool wear. TiN-coated and uncoated HSS-G drill bits were used in the experiments. The results obtained in the experiments were evaluated according to the general full factorial design and the effect graphs of different drilling parameters were generated. In addition, ANOVA tables were created to evaluate the results. SEM and OM micrographs were used to investigate the tool wear and chip formation. Finally, a multi-response optimization was performed to optimize drilling parameters for minimum cutting force and surface roughness. According to, optimum drilling parameters were determined as AA6061-T6 for material, uncoated HSS-G for a drill bit, 1520 rpm for spindle speed, and highest ultrasonic vibration frequency at 22.5 kHz. In addition, it was observed that ultrasonic vibration has the effect of reducing built-up edge formation on the drill bit. (C) 2020 CIRP.
引用
收藏
页码：265 / 280
页数：16
相关论文
共 50 条
[41]   Investigation of Heat Annealing and Parametric Optimization for Drilling of Monel-400 Alloy [J].
Abdo, Basem M. A. ;
Almuzaiqer, Redhwan ;
Noman, Mohammed A. ;
Chintakindi, Sanjay .
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2023, 7 (05)
[42]   Experimental Investigation of Cutting Parameters Effects on the Surface Roughness and Tools Wear during the Drilling of Fiber Reinforced Composite Materials [J].
Ullah, Irshad ;
Wasif, Muhammad ;
Tufail, Muhammad ;
Khan, Muhammad Adnan ;
Iqbal, Syed Amir .
MEHRAN UNIVERSITY RESEARCH JOURNAL OF ENGINEERING AND TECHNOLOGY, 2019, 38 (03) :717-728
[43]   Tool wear and hole quality evaluation in cryogenic Drilling of Inconel 718 superalloy [J].
Khanna, Navneet ;
Agrawal, Chetan ;
Gupta, Munish Kumar ;
Song, Qinghua .
TRIBOLOGY INTERNATIONAL, 2020, 143
[44]   On Miniature Hole Quality and Tool Wear When Mechanical Drilling of Mild Steel [J].
Abdelhafeez Hassan, Ali ;
Li, Mao Jun ;
Mahmoud, Saad .
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2020, 45 (11) :8917-8929
[45]   Experimental investigations into tool wear of drilling CFRP [J].
Hrechuk, Andrew ;
Bushlya, Volodymyr ;
M'Saoubi, Rachid ;
Stahl, Jan-Eric .
PROCEEDINGS OF THE 8TH SWEDISH PRODUCTION SYMPOSIUM (SPS 2018), 2018, 25 :294-301
[46]   Tool wear evaluation in drilling by acoustic emission [J].
Gomez, Martin P. ;
Hey, Alfredo M. ;
Ruzzante, Jose E. ;
D'Attellis, Carlos E. .
INTERNATIONAL CONGRESS ON ULTRASONICS, PROCEEDINGS, 2010, 3 (01) :819-825
[47]   Comparative tool wear and hole quality investigation in drilling of aerospace grade T800 CFRP using different external cooling lubricants [J].
Hou, Guoyi ;
Qiu, Jianping ;
Zhang, Kaifu ;
Cao, Sipeng ;
Cheng, Hui ;
Luo, Bin ;
Cheng, Yi .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 106 (3-4) :937-951
[48]   Optimization of drilling parameters on surface roughness in drilling of AISI 1045 using response surface methodology and genetic algorithm [J].
Kilickap, Erol ;
Huseyinoglu, Mesut ;
Yardimeden, Ahmet .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2011, 52 (1-4) :79-88
[49]   MONITORING OF CHIP FLOW STATE IN DRILLING WITH TOOL WEAR PROGRESS [J].
Matsumura, Takashi ;
Tamura, Shoichi .
PROCEEDINGS OF 2024 INTERNATIONAL SYMPOSIUM ON FLEXIBLE AUTOMATION, ISFA 2024, 2024,
[50]   Analysis and optimization of drilling parameters for tool wear and hole dimensional accuracy in B4C reinforced Al-alloy [J].
Taskesen, A. ;
Kutukde, K. .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2013, 23 (09) :2524-2536
12345