Metal-gas eutectic growth during unidirectional solidification

被引：36
|
作者：
Liu, Yuan [1 ]
Li, Yanxiang [1 ]
Wan, Jiang [1 ]
Zhang, Huawei [1 ]
机构：
[1] Tsinghua Univ, Dept Mech Engn, Beijing 100084, Peoples R China
来源：
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2006年 / 37A卷 / 09期
基金：
中国国家自然科学基金;
关键词：
D O I：
10.1007/BF02586119
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Metal-gas eutectic growth is a novel method for fabricating porous metals in which the gas pores are rodlike and aligned with the solidification direction. A new model was developed to predict the effects of the gas pressure and the solidification velocity on the porosity, pore diameter, and interpore spacing in metal-gas eutectic unidirectional solidification. The pore size and the interpore spacing are primarily dependent on the total gas pressure, but the porosity is dependent not only on the total gas pressure but also on the ratio of the partial pressures of hydrogen to argon.
引用
收藏
页码：2871 / 2878
页数：8
相关论文
共 50 条
  • [41] CONCENTRATION CHANGES IN BINARY METAL-GAS SOLUTIONS DURING SIMULTANEOUS REMOVAL OF GAS AND EVAPORATION OF METAL .I. THEORETICAL CONSIDERATIONS
    HORZ, G
    ZEITSCHRIFT FUR METALLKUNDE, 1969, 60 (02): : 115 - &
  • [42] Growth of Al3Fe in Al - 2.0% Fe eutectic alloy under unidirectional solidification
    Rongde, Li
    Shujun, Li
    Haipeng, Yu
    Zhenping, Zhou
    Yanhua, Bai
    Yuqiao, Xu
    Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, 2000, 36 (06): : 82 - 85
  • [43] Convective effects during unidirectional solidification
    Zhang, Guozhi
    Feng, Yanhui
    Zhang, Xinxin
    Nie, Hong
    Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 2008, 30 (05): : 548 - 552
  • [44] Hexagonal metal oxide monolayers derived from the metal-gas interface
    Zhang, Bao Yue
    Xu, Kai
    Yao, Qifeng
    Jannat, Azmira
    Ren, Guanghui
    Fields, Matthew R.
    Wens, Xiaoming
    Zhou, Chunhua
    Zavabeti, Ali
    Ou, Jian Zhen
    NATURE MATERIALS, 2021, 20 (08) : 1073 - +
  • [45] CORRELATION OF THE BASIC PARAMETERS OF UNIDIRECTIONAL SOLIDIFICATION OF THE PB-SN EUTECTIC
    WOLCZYNSKI, W
    CIACH, R
    CRYSTAL RESEARCH AND TECHNOLOGY, 1984, 19 (08) : 1093 - 1099
  • [46] UNIDIRECTIONAL SOLIDIFICATION OF CO-CR-C MONOVARIANT EUTECTIC ALLOYS
    THOMPSON, ER
    LEMKEY, FD
    METALLURGICAL TRANSACTIONS, 1970, 1 (10): : 2799 - &
  • [47] STRUCTURE OF EUTECTIC ALUMINUM-BERYLLIUM ALLOYS OBTAINED BY UNIDIRECTIONAL SOLIDIFICATION
    TROTTIER, JP
    GRAF, R
    COMPTES RENDUS HEBDOMADAIRES DES SEANCES DE L ACADEMIE DES SCIENCES SERIE C, 1970, 271 (11): : 613 - &
  • [48] POSSIBILITIES OF THE MATERIALS PROPERTIES IMPROVEMENT FOR THE CEMENTITE EUTECTIC BY MEANS OF UNIDIRECTIONAL SOLIDIFICATION
    Trepczynska-Lent, M.
    ARCHIVES OF METALLURGY AND MATERIALS, 2013, 58 (03) : 987 - 991
  • [49] DIFFUSION PENETRABILITY OF THE PHASE BOUNDARIES IN EUTECTIC ALLOYS PRODUCED BY THE UNIDIRECTIONAL SOLIDIFICATION
    BOKSTEIN, SZ
    VASILENOK, LB
    KISHKIN, ST
    DOKLADY AKADEMII NAUK SSSR, 1985, 280 (03): : 613 - &
  • [50] Natural convection suppression and crystal growth during unidirectional solidification of a binary system
    Nishimura, Tatsuo
    Wakamatsu, Mikio
    Heat Transfer - Asian Research, 2000, 29 (02): : 120 - 131
12345