The influence of calcium carbonate and its modifications on the extrusion process and selected properties of polypropylene cast films

被引：3

作者：

Klozinski, Arkadiusz ^{[1
]}

Szczepanska, Malgorzata ^{[1
]}

Jakubowska, Paulina ^{[1
]}

Samujlo, Bronislaw ^{[2
]}

Barczewski, Mateusz ^{[3
]}

Lota, Grzegorz ^{[4
]}

机构：

[1] Poznan Univ Tech, Inst Chem Technol & Engn, Fac Chem Technol, Berdy-Chowo 4, PL-60965 Poznan, Poland

[2] Lublin Univ Technol, Fac Mech Engn, Dept Technol & Polymer Proc, Nadbystrzycka 36, PL-20618 Lublin, Poland

[3] Poznan Univ Tech, Inst Mat Technol, Fac Mech Engn & Management, Piotrowo 3, PL-61138 Poznan, Poland

[4] Poznan Univ Tech, Inst Chem & Tech Electrochem, Fac Chem Technol, Berdychowo 4, PL-60965 Poznan, Poland

来源：

POLIMERY | 2022年 / 67卷 / 10期

关键词：

polypropylene; calcium carbonate; polymer composites; extrusion; films; tensile strength; extensional viscosity; haze; gloss; RHEOLOGICAL PROPERTIES; OFF-LINE; POLYETHYLENE COMPOSITES; MECHANICAL-PROPERTIES; OPTICAL-PROPERTIES; HAZE; FLOW; CRYSTALLIZATION; POLYOLEFIN; GLOSS;

D O I：

10.14314/polimery.2022.10.6

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

The effect of unmodified and stearic acid-modified calcium carbonate (5, 10, 20 and 30 wt%) on selected properties (tensile strength, puncture resistance, haze and gloss) and processability of poly-propylene films (MVR, extensional viscosity) was investigated. The composites were obtained in the twin-screw extrusion process with cold granulation, and the films in the single-screw extrusion process, using a flat die head (so-called cast films) and a chill roll type cooling and pull-back device. It has been shown that stearic acid is an effective modifier of polypropylene processing properties both under shear and tensile flow conditions (lower extensional viscosity of films containing modified calcium carbon-ate).

引用

页码：509 / 521

页数：13

共 54 条

[1] Haze of polyethylene films -: Effects of material parameters and clarifying agents
Andreassen, E
Larsen, Å
Nord-Varhaug, K
Skar, M
Oysæd, H
[J]. POLYMER ENGINEERING AND SCIENCE, 2002, 42 (05) : 1082 - 1097
[2] [Anonymous], 2000, Tworzywa sztuczne. Poradnik
[3] Development and Characterization of Bioactive Polypropylene Films for Food Packaging Applications
Antosik, Adrian Krzysztof
Kowalska, Urszula
Stobinska, Magdalena
Dzieciol, Paulina
Pieczykolan, Magdalena
Kozlowska, Katarzyna
Bartkowiak, Artur
[J]. POLYMERS, 2021, 13 (20)
[4] Flow instabilities in polymer melt extrusions Part II. Instabilities suppression and evaluation methods
Barczewski, Mateusz
[J]. POLIMERY, 2016, 61 (04) : 248 - 254
[5] Flow instabilities in polymer melt extrusion. Part I. Types and characteristics of flow instabilities
Barczewski, Mateusz
[J]. POLIMERY, 2015, 60 (10) : 612 - 619
[6] On Clarification of Haze in Polypropylene
Bernland, Karin
Goossens, J. G. P.
Smith, Paul
Tervoort, Theo A.
[J]. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 2016, 54 (09) : 865 - 874
[7] Billham M., 2008, Development in Chemical Engineering and Mineral processing, V11, P137, DOI DOI 10.1002/APJ.5500110214
[8] BRONIEWSKI T., 2000, METODY BADAN OCENA W
[9] Cantor K., 2006, BLOWN FILM EXTRUSION
[10] Mechanical and rheological properties of composites based on polyolefin and mineral additives
da Silva, ALN
Rocha, MCG
Moraes, MAR
Valente, CAR
Coutinho, FMB
[J]. POLYMER TESTING, 2002, 21 (01) : 57 - 60

← 1 2 3 4 5 6 →