Experimental study of convective heat transfer from in-line cam shaped tube bank in crossflow

被引:65
作者
Lavasani, Arash Mirabdolah [1 ]
Bayat, Hamidreza [2 ]
Maarefdoost, Taher [2 ]
机构
[1] Islamic Azad Univ, Cent Tehran Branch, Dept Mech Engn, Tehran, Iran
[2] Islamic Azad Univ, Cent Tehran Branch, Young Researchers & Elite Club, Tehran, Iran
关键词
Experimental; Cam shaped; Tube bank; Heat transfer; Crossflow; FORCED-CONVECTION; ELLIPTIC TUBES; PRESSURE-DROP; EXCHANGER; PERFORMANCE; CYLINDERS; OPTIMIZATION; BUNDLES;
D O I
10.1016/j.applthermaleng.2013.12.078
中图分类号
O414.1 [热力学];
学科分类号
摘要
Heat transfer from cam-shaped tube bank has been studied experimentally. Tubes were mounted in an in-line arrangement with two longitudinal pitch ratios 1.5 and 2. Reynolds number based on equivalent diameter varied in range of 27,000 <= Re-D <= 42,500. Drag coefficient and heat transfer from tubes in second row were obtained. Results show that drag coefficient and heat transfer of cam shaped tubes depend on position of tubes in tube bank. Tubes that located at first and second column have the maximum and minimum value of drag coefficient, respectively. In addition, Heat transfer from subsequent tubes is greater than tube in first column. Thermal hydraulic performance of cam shape tube is about 6 times greater than circular tube with same equivalent diameter. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码:85 / 93
页数:9
相关论文
共 31 条
[1]   Numerical modeling of finned heat exchangers [J].
Bilirgen, Harun ;
Dunbar, Stephen ;
Levy, Edward K. .
APPLIED THERMAL ENGINEERING, 2013, 61 (02) :278-288
[2]   Numerical evaluation of alternate tube configurations for particle deposition rate reduction in heat exchanger tube bundles [J].
Bouris, D ;
Papadakis, G ;
Bergeles, G .
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2001, 22 (05) :525-536
[3]   Three-dimensional flow around two circular cylinders in tandem arrangement [J].
Deng, Jian ;
Ren, An-Lu ;
Zou, Jian-Feng ;
Shao, Xue-Ming .
FLUID DYNAMICS RESEARCH, 2006, 38 (06) :386-404
[4]   Development of the performance of an alpha-type heat engine by using elbow-bend transposed-fluids heat exchanger as a heater and a cooler [J].
El-Ehwany, A. A. ;
Hennes, G. M. ;
Eid, E. I. ;
El-Kenany, E. A. .
ENERGY CONVERSION AND MANAGEMENT, 2011, 52 (02) :1010-1019
[5]  
Hoerner S. F, 1965, Fluid-Dynamic Drag. Theoretical, Experimental and Statistical Information
[6]   Thermal performance criteria of elliptic tube bundle in crossflow [J].
Ibrahim, Talaat A. ;
Gomaa, Abdalla .
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2009, 48 (11) :2148-2158
[7]  
Kays W.M., 1998, COMPACT HEAT EXCHANG, V3rd
[8]  
Kreith F, 2001, PRINCIPLE HEAT TRANS
[9]   Development and evaluation of enhanced heat transfer tubes [J].
Kukulka, David J. ;
Smith, Rick ;
Fuller, Kevin G. .
APPLIED THERMAL ENGINEERING, 2011, 31 (13) :2141-2145
[10]   Experimental study and large eddy simulation of turbulent flow around tube bundles composed of wavy and circular cylinders [J].
Lam, K. ;
Lin, Y. F. ;
Zou, L. ;
Liu, Y. .
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2010, 31 (01) :32-44