Experimental investigation of the jet-on-jet physical phenomenon in laser-induced forward transfer (LIFT)

被引:1
作者
Miksys, Justinas [1 ,2 ]
Arutinov, Gari [2 ]
Feinaeugle, Matthias [1 ]
Romer, Gert-willem [1 ]
机构
[1] Univ Twente, Chair Laser Proc, Dept Mech Solids Surfaces & Syst MS3, Fac Engn Technol, Drienerlolaan 5, NL-7522 NB Enschede, Netherlands
[2] Holst Ctr TNO, High Tech Campus 31, NL-5656 AE Eindhoven, Netherlands
关键词
INDUCED BREAKDOWN SPECTROSCOPY; JETTING DYNAMICS; SILVER; ABLATION; MICROFABRICATION; DEPOSITION; METALS; PS;
D O I
10.1364/OE.401825
中图分类号
O43 [光学];
学科分类号
070207 ; 0803 ;
摘要
Understanding the physics behind the ejection dynamics in laser-induced forward transfer (LIFT) is of key importance in order to develop new printing techniques and overcome their limitations. In this work, a new jet-on-jet ejection phenomenon is presented and its physical origin is discussed. Time-resolved shadowgraphy imaging was employed to capture the ejection dynamics and is complemented with the photodiode intensity measurements in order to capture the light emitted by laser-induced plasma. A focus scan was conducted, which confirmed that the secondary jet is ejected due to laser-induced plasma generated at the center of the laser spot, where intensity is the highest. Five characteristic regions of the focus scan, with regards to laser fluence level and laser spot size, were distinguished. The study provides new insights in laser-induced jet dynamics and shows the possibility of overcoming the trade-off between the printing resolution and printing distance. (C) 2020 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
引用
收藏
页码:37436 / 37449
页数:14
相关论文
共 44 条
  • [41] Three-Dimensional Printing of Interconnects by Laser Direct-Write of Silver Nanopastes
    Wang, Jiwen
    Auyeung, Raymond C. Y.
    Kim, Heungsoo
    Charipar, Nicholas A.
    Pique, Alberto
    [J]. ADVANCED MATERIALS, 2010, 22 (40) : 4462 - 4466
  • [42] Microdroplet deposition by laser-induced forward transfer
    Willis, DA
    Grosu, V
    [J]. APPLIED PHYSICS LETTERS, 2005, 86 (24) : 1 - 3
  • [43] Laser Transfer of Metals and Metal Alloys for Digital Microfabrication of 3D Objects
    Zenou, Michael
    Sa'ar, Amir
    Kotler, Zvi
    [J]. SMALL, 2015, 11 (33) : 4082 - 4089
  • [44] Time-Resolved Imaging Study of Jetting Dynamics during Laser Printing of Viscoelastic Alginate Solutions
    Zhang, Zhengyi
    Xiong, Ruitong
    Mei, Renwei
    Huang, Yong
    Chrisey, Douglas B.
    [J]. LANGMUIR, 2015, 31 (23) : 6447 - 6456