Performance Evaluation of Nanographite-Based Cutting Fluid in Machining Process

被引：109

作者：

Amrita, M. ^{[1
]}

Srikant, R. R. ^{[1
]}

Sitaramaraju, A. V. ^{[2
]}

机构：

[1] GITAM Univ, Dept Mech Engn, Visakhapatnam 530045, Andhra Pradesh, India

[2] Jawaharlal Nehru Technol Univ, Dept Mech Engn, Hyderabad, Andhra Pradesh, India

来源：

MATERIALS AND MANUFACTURING PROCESSES | 2014年 / 29卷 / 05期

关键词：

Machinability; Cooling; Wear; Experimentation; Forces; Flank; Roughness; Conventional; Nanoparticles; Friction; Graphite; Cutting; MINIMUM QUANTITY LUBRICATION; AISI; 1040; STEEL; MQL TECHNIQUE; NANOFLUIDS; PARAMETERS; ALLOY; OIL;

D O I：

10.1080/10426914.2014.893060

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Health and environmental concern on use of cutting fluids during manufacturing has led to development of minimum quantity lubrication (MQL) which requires specialized fluids having superior properties. In the present work, a new nanofluid is prepared and is evaluated for lubricating property. Its performance is evaluated in machining process by applying it as MQL in turning by measuring cutting forces, cutting temperature, flank wear, roughness of machined surface, and examining chip morphology. Newly prepared nanofluid showed improvement in the lubricating properties of base fluid and also showed superior performance compared to dry machining, flood cooling, and MQL application of conventional cutting fluid.

引用

页码：600 / 605

页数：6

共 50 条

[31] Preparation of water-soluble nanographite and its application in water-based cutting fluid [J].

Chen, Qiang ;

Wang, Xue ;

Wang, Zongting ;

Liu, Yu ;

You, Tingzheng .

NANOSCALE RESEARCH LETTERS, 2013, 8 :1-8

[32] Influence of iron and nickel on the microwave absorption and other functional properties of nanographite-based nanocomposite paints [J].

Anjali Prakash ;

Avanish K. Srivastava ;

Mritunjay Kumar Pandey ;

Ramamoorthy Nagarajan ;

Amitava Bhattacharyya .

Journal of Coatings Technology and Research, 2021, 18 :1691-1698

[33] Cutting performance and machining economy of the hard cutting tools in clean cutting of hardened H13 steel [J].

Jing, Chengli ;

Zheng, Guangming ;

Cheng, Xiang ;

Cui, Yuxin ;

Liu, Huanbao ;

Zhang, Huaqiang .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 130 (11-12) :5165-5179

[34] Performance evaluation of Ti-6Al-4V machining using nano-cutting fluids under minimum quantity lubrication [J].

Hegab, H. ;

Umer, U. ;

Deiab, I. ;

Kishawy, H. .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 95 (9-12) :4229-4241

[35] Formulation and performance evaluation of a novel coconut oil-based metalworking fluid [J].

Wickramasinghe, K. C. ;

Perera, G. I. P. ;

Herath, H. M. C. M. .

MATERIALS AND MANUFACTURING PROCESSES, 2017, 32 (09) :1026-1033

[36] Tribological and machining characteristics of a minimum quantity lubrication (MQL) technology using GO/SiO2 hybrid nanoparticle water-based lubricants as cutting fluids [J].

Lv, Tao ;

Huang, Shuiquan ;

Hu, Xiaodong ;

Ma, Yaliang ;

Xu, Xuefeng .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 96 (5-8) :2931-2942

[37] Development of Bio-Cutting Fluid (Cirtullus lanatus) and its Performance Assessment on the Machining of AISI 1525 Steel Using Taguchi Technique and Grey Relational Analysis [J].

Kazeem, Rasaq A. ;

Fadare, David A. ;

Ikumapayi, Omolayo M. ;

Azeez, Temitayo M. ;

Adediran, Adeolu A. .

BIOINTERFACE RESEARCH IN APPLIED CHEMISTRY, 2022, 12 (04) :5324-5346

[38] Performance of coated and uncoated cutting tools using flood and cryogenic liquid in machining titanium alloy [J].

Lakshmanan, S. ;

Kumar, M. Pradeep ;

Dhananchezian, M. ;

Burri, Srinivasa Reddy .

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2025, 50 (03)

[39] Water Vapour assisted machining of Inconel 718 incorporating through-tool cutting fluid delivery approach [J].

Kadam, Ganesh S. ;

Pawade, Raju S. .

INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2024, 18 (10) :7317-7331

[40] Experimental investigation on the performance of MQL drilling of AISI 321 stainless steel using nano-graphene enhanced vegetable-oil-based cutting fluid [J].

Pal, Amrit ;

Chatha, Sukhpal Singh ;

Sidhu, Hazoor Singh .

TRIBOLOGY INTERNATIONAL, 2020, 151

← 1 2 3 4 5 →