Performance Evaluation of Nanographite-Based Cutting Fluid in Machining Process

被引：109

作者：

Amrita, M. ^{[1
]}

Srikant, R. R. ^{[1
]}

Sitaramaraju, A. V. ^{[2
]}

机构：

[1] GITAM Univ, Dept Mech Engn, Visakhapatnam 530045, Andhra Pradesh, India

[2] Jawaharlal Nehru Technol Univ, Dept Mech Engn, Hyderabad, Andhra Pradesh, India

来源：

MATERIALS AND MANUFACTURING PROCESSES | 2014年 / 29卷 / 05期

关键词：

Machinability; Cooling; Wear; Experimentation; Forces; Flank; Roughness; Conventional; Nanoparticles; Friction; Graphite; Cutting; MINIMUM QUANTITY LUBRICATION; AISI; 1040; STEEL; MQL TECHNIQUE; NANOFLUIDS; PARAMETERS; ALLOY; OIL;

D O I：

10.1080/10426914.2014.893060

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Health and environmental concern on use of cutting fluids during manufacturing has led to development of minimum quantity lubrication (MQL) which requires specialized fluids having superior properties. In the present work, a new nanofluid is prepared and is evaluated for lubricating property. Its performance is evaluated in machining process by applying it as MQL in turning by measuring cutting forces, cutting temperature, flank wear, roughness of machined surface, and examining chip morphology. Newly prepared nanofluid showed improvement in the lubricating properties of base fluid and also showed superior performance compared to dry machining, flood cooling, and MQL application of conventional cutting fluid.

引用

页码：600 / 605

页数：6

共 50 条

[21] Sustainable machining: enhancing performance with vegetable oil-based nano cutting fluids [J].

Manikanta, Javvadi Eswara ;

Ambhore, Nitin ;

Nikhare, Chetan ;

Gurajala, Naveen Kumar ;

Krishna, Ch. Hari .

DISCOVER MATERIALS, 2025, 5 (01)

[22] Influence of Cutting Fluid on Machining Processes: A Review [J].

Araoyinbo, Alaba Oladeji ;

Edun, Mosunmola Bose ;

Samuel, Ayuba Ushe ;

Rahmat, Azmi ;

Biodun, Matthew Biola ;

Albakri, Mohammed Mustafa .

JURNAL KEJURUTERAAN, 2022, 34 (03) :365-373

[23] Effect of hBN and SDS added vegetable based cutting fluid application on the performance of turning Ti6Al4V alloys: A Comparative analysis with Taguchi and ANN approaches [J].

Celik, Muhammet ;

Sencan, Aysegul Cakir ;

Sirin, Senol ;

Erdogan, Beytullah ;

Sencan, Cevdet .

MATERIALS CHEMISTRY AND PHYSICS, 2024, 322

[24] Effect of Vegetable Oil-Based Hybrid Nano-Cutting Fluids on Surface Integrity of Titanium Alloy in Machining Process [J].

Pasam, Vamsi Krishna ;

Neelam, Parimala .

SMART AND SUSTAINABLE MANUFACTURING SYSTEMS, 2020, 4 (01) :1-18

[25] Nano-Cutting Fluid for Enhancement of Metal Cutting Performance [J].

Khandekar, S. ;

Sankar, M. Ravi ;

Agnihotri, V. ;

Ramkumar, J. .

MATERIALS AND MANUFACTURING PROCESSES, 2012, 27 (09) :963-967

[26] An Investigation on Green Machining: Cutting Process Characteristics of Organic Metalworking Fluid [J].

Lee, T. S. ;

Choong, H. B. .

FRONTIERS OF MANUFACTURING SCIENCE AND MEASURING TECHNOLOGY, PTS 1-3, 2011, 230-232 :809-813

[27] Investigation of a new water-based cutting fluid for machining of titanium alloys [J].

Yang, Ye ;

Guo, Songshan ;

Si, Lina ;

Liu, Tengfei ;

Dai, Yuanjing ;

Yan, Chengzhi ;

Zhang, Chenhui .

JOURNAL OF MANUFACTURING PROCESSES, 2021, 71 :398-406

[28] Synergism of TiO2 and Graphene as Nano-Additives in Bio-Based Cutting Fluid-An Experimental Investigation [J].

Anand, Rahul ;

Raina, Ankush ;

Irfan Ul Haq, Mir ;

Mir, M. J. ;

Gulzar, Ovais ;

Wani, M. F. .

TRIBOLOGY TRANSACTIONS, 2021, 64 (02) :350-366

[29] Preparation and evaluation of a stable CNT-water based nano cutting fluid for machining hard-to-cut material [J].

Sharmin, Israt ;

Gafur, Md Abdul ;

Dhar, Nikhil Ranjan .

SN APPLIED SCIENCES, 2020, 2 (04)

[30] Biodegradation and hard machining performance comparison of ecofriendly cutting fluid and mineral oil using flood cooling and minimum quantity cutting fluid techniques [J].

Gajrani, Kishor Kumar ;

Ram, Dhanna ;

Sankar, Mamilla Ravi .

JOURNAL OF CLEANER PRODUCTION, 2017, 165 :1420-1435

← 1 2 3 4 5 →