EFFECT OF PHASE ARCHITECTURE ON THE THERMAL EXPANSION BEHAVIOR OF INTERPENETRATING METAL/CERAMIC COMPOSITES

被引：0

作者：

Roy, Siddhartha ^{[1
]}

Albrecht, Pascal ^{[1
]}

Przybilla, Lars ^{[1
]}

Weidenmann, Kay Andre ^{[1
]}

Heilmaier, Martin ^{[1
]}

Wanner, Alexander ^{[1
]}

机构：

[1] Karlsruhe Inst Technol, Inst Appl Mat, D-76131 Karlsruhe, Baden Wurttembe, Germany

来源：

PROCESSING AND PROPERTIES OF ADVANCED CERAMICS AND COMPOSITES V | 2013年 / 240卷

关键词：

MICROSTRUCTURE;

D O I：

暂无

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Interpenetrating metal/ceramic composites (IPC) consisting of percolating metallic and ceramic phases offer a good combination of properties. Thermal expansion behavior of two IPCs with different phase architectures is studied in this work during thermal cycling between RT and 500 degrees C. The composites were fabricated by melt infiltration in open porous ceramic preforms. One of the preform types was made by freeze-casting and had a lamellar structure; while the other type was fabricated by burning out cellulose place holders and had a highly open porous structure. Results show that the phase architecture strongly influences the thermal expansion of the composites. Freeze-east samples display pronounced anisotropy - the thermal expansion coefficient (CTE) being low parallel to the freezing direction and high transverse to this direction. Only slight anisotropy is displayed by the highly open porous alumina based composite, with marginally higher CTE along the preform press direction. Thermal strains and CTEs of the highly open porous alumina based composite lie within the extremal values of the composite based on the freeze-east preform. Thermal expansions of the composites correlate well with preform stiffness, with highest thermal expansion being observed along the most compliant directions in both composites.

引用

页码：33 / 43

页数：11

共 24 条

[1] Thermal expansion of metals reinforced with ceramic particles and microcellular foams [J].

Balch, DK ;

Fitzgerald, TJ ;

Michaud, VJ ;

Mortensen, A ;

Shen, YL ;

Suresh, S .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1996, 27 (11) :3700-3717

[2]

Berthelot J.-M., 1999, COMPOSITE MAT MECH B

[3] EXPERIMENTAL AND THEORETICAL-STUDY OF THE THERMAL-EXPANSION BEHAVIOR OF ALUMINUM REINFORCED BY CONTINUOUS CERAMIC FIBERS [J].

BOHM, HJ ;

DEGISCHER, HP ;

LACOM, W ;

QU, J .

COMPOSITES ENGINEERING, 1995, 5 (01) :37-49

[4]

Chawla N., 2006, Metal matrix composites

[5]

Clyne T.W., 1993, INTRO METAL MATRIX C

[6]

Delannay F., 2000, COMPREHENSIVE COMPOS, V3

[7] Ice-templated porous alumina structures [J].

Deville, Sylvain ;

Saiz, Eduardo ;

Tomsia, Antoni P. .

ACTA MATERIALIA, 2007, 55 (06) :1965-1974

[8] Thermal expansion studies on aluminium-matrix composites with different reinforcement architecture of SiC particles [J].

Huber, T. ;

Degischer, H. P. ;

Lefranc, G. ;

Schmitt, T. .

COMPOSITES SCIENCE AND TECHNOLOGY, 2006, 66 (13) :2206-2217

[9] A numerical study on the coefficients of thermal expansion of fiber reinforced composite materials [J].

Karadeniz, Z. Haktan ;

Kumlutas, Dilek .

COMPOSITE STRUCTURES, 2007, 78 (01) :1-10

[10] Anisotropy of thermal expansion in Mg- and Mg4Li-matrix composites reinforced by short alumina fibers [J].

Kudela, S., Jr. ;

Rudajevova, A. ;

Kudela, S. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 462 (1-2) :239-242

← 1 2 3 →