Mode I fracture characterization of a hybrid cork and carbon-epoxy laminate

被引：14
|
作者：
Fernandes, R. [1 ]
de Moura, M. F. S. F. [1 ]
Silva, F. G. A. [2 ]
Dourado, N. [3 ]
机构：
[1] Univ Porto, FEUP, DEMec, P-4200465 Oporto, Portugal
[2] INEGI Inst Engn Mecan & Gestao Ind, P-4200465 Oporto, Portugal
[3] Univ Tras os Montes & Alto Douro, CITAB, P-5000801 Quinta De Prados, Vila Real, Portugal
来源：
COMPOSITE STRUCTURES | 2014年 / 112卷
关键词：
Hybrid laminate; Carbon-epoxy; Cork; Mode I toughness; Cohesive zone modelling; LOW-VELOCITY IMPACT; COMPOSITES; DELAMINATION; RESISTANCE; DAMAGE; PERFORMANCE; PREDICTION; BEHAVIOR;
D O I：
10.1016/j.compstruct.2014.02.019
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
In this work fracture characterization under model loading of a hybrid laminate composed by a unidirectional carbon-epoxy composite and cork was performed using the Double Cantilever Beam test. An equivalent crack length procedure based on specimen compliance and Timoshenko beam theory applied to the composed beam was adopted to evaluate the fracture energy. The procedure revealed to be quite effective and it was validated numerically by means of finite element analysis including cohesive zone modelling. The analysis of the experimental results has shown that an increase of 32% of mode I toughness relative to monolithic carbon-epoxy laminate was obtained, which proves that hybridization using cork results in a quite effective procedure to increase interlaminar toughness of composite laminates. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码：248 / 253
页数：6
相关论文
共 50 条
  • [1] Mode II fracture characterization of a hybrid cork/carbon-epoxy laminate
    de Moura, M. F. S. F.
    Fernandes, R.
    Silva, F. G. A.
    Dourado, N.
    COMPOSITES PART B-ENGINEERING, 2015, 76 : 44 - 51
  • [2] Mixed-mode I plus II fracture characterization of a hybrid carbon-epoxy/ cork laminate using the Single-Leg Bending test
    de Moura, M. F. S. F.
    Cavaleiro, P. M. L. C.
    Silva, F. G. A.
    Dourado, N.
    COMPOSITES SCIENCE AND TECHNOLOGY, 2017, 141 : 24 - 31
  • [3] Low velocity impact behaviour of a hybrid carbon-epoxy/cork laminate
    Silva, F. G. A.
    de Moura, M. F. S. F.
    Magalhaes, A. G.
    STRAIN, 2017, 53 (06):
  • [4] Mode I interlaminar fracture toughness of carbon-epoxy coupons with embedded ceramic sensors
    Torres, Mauricio
    Tellez, Ricardo A.
    Hernandez, Hilario
    Camps, Thierry
    ADVANCES IN POLYMER TECHNOLOGY, 2018, 37 (06) : 2294 - 2302
  • [5] Study on bearing strength and failure mode of a carbon-epoxy composite laminate for designing bolted joint structures
    Yoon, Donghyun
    Kim, Sangdeok
    Kim, Jaehoon
    Doh, Youngdae
    COMPOSITE STRUCTURES, 2020, 239
  • [6] Influence of temperature on the delamination process under mode I fracture and dynamic loading of two carbon-epoxy composites
    Argueelles, A.
    Vina, J.
    Canteli, A. F.
    Coronado, P.
    Mollon, V.
    COMPOSITES PART B-ENGINEERING, 2015, 68 : 207 - 214
  • [7] MODE I FRACTURE OF THIN-PLY CARBON-EPOXY LAMINATES: EFFECTS OF PLY THICKNESS
    Frossard, Guillaume
    Cugnoni, Joel
    Gmur, Thomas
    Botsis, John
    20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,
  • [8] Influence of the Matrix Type on the Mode I Fracture of Carbon-Epoxy Composites Under Dynamic Delamination
    A. Argüelles
    J. Viña
    A. F. Canteli
    A. Lopez
    Experimental Mechanics, 2011, 51 : 293 - 301
  • [9] Influence of the Matrix Type on the Mode I Fracture of Carbon-Epoxy Composites Under Dynamic Delamination
    Argueelles, A.
    Vina, J.
    Canteli, A. F.
    Lopez, A.
    EXPERIMENTAL MECHANICS, 2011, 51 (03) : 293 - 301
  • [10] Impact of Saline Environment Exposure on the Fatigue Performance of Adhesive Joints in Carbon-Epoxy Composites Under Mode I and II Fracture Conditions
    Vigon, Paula
    Arguelles, Antonio
    Lozano, Miguel
    Vina, Jaime
    3RD INTERNATIONAL CONFERENCE ON INDUSTRIAL APPLICATIONS OF ADHESIVES 2024, IAA 2024, 2025, : 115 - 127
12345