A guide for the ultimate longitudinal strength assessment of ships

被引:0
|
作者
Paik, JK [1 ]
机构
[1] Pusan Natl Univ, Dept Naval Architecture & Ocean Engn, Pusan 609735, South Korea
来源
MARINE TECHNOLOGY AND SNAME NEWS | 2004年 / 41卷 / 03期
关键词
D O I
暂无
中图分类号
P75 [海洋工程];
学科分类号
0814 ; 081505 ; 0824 ; 082401 ;
摘要
The aim of the present paper is to establish a practical guide for the ultimate longitudinal strength assessment of ships. The ultimate hull girder strength of a ship hull can be calculated using either the progressive collapse analysis method or closed-form design formulas. In the present paper, both the progressive collapse analysis method and the design formulas are presented. A comparison between the progressive collapse analysis results and the design formula solutions for merchant cargo ship hulls is undertaken. The total design (extreme) bending moment of a ship hull is estimated as the sum of the still-water and wave-induced bending moment components as usual. The safety measure of a ship hull is then defined as a ratio of the ultimate longitudinal strength to the total design bending moment. The developed guidelines are applied to safety measure calculations of merchant ship hulls with respect to hull girder collapse. It is concluded that the guidance and insights developed from the present study will be very useful for the ultimate limit state design of newly built ships as well as the safety measure calculations of existing ship hulls. The essence of the proposed guide shall form ISO code 18072-2: Ships and Marine Technology-Ship Structures-Part 2: Requirements of Their Ultimate Limit State Assessment.
引用
收藏
页码:122 / 139
页数:18
相关论文
共 50 条
  • [41] Ultimate strength assessment of continuous stiffened panels under combined longitudinal compressive load and lateral pressure
    Xu, Ming Cai
    Song, Zhao Jun
    Pan, Jin
    Soares, Carlos Guedes
    OCEAN ENGINEERING, 2017, 139 : 39 - 53
  • [42] ULTIMATE COMPRESSIVE STRENGTH ASSESSMENT OF DAMAGED PLATES
    Amante, Diogo do Amaral M.
    Pasqualino, Ilson P.
    Estefen, Segen F.
    PROCEEDINGS OF THE ASME 36TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, 2017, VOL 3B, 2017,
  • [43] Uncertainty assessment of the ultimate strength of a stiffened panel
    Garbatov, Y.
    Tekgoz, M.
    Guedes Soares, C.
    ADVANCES IN MARINE STRUCTURES, 2011, : 659 - 668
  • [44] Ultimate strength assessment of welded stiffened plates
    Tekgoz, M.
    Garbatov, Y.
    Soares, C. Guedes
    ENGINEERING STRUCTURES, 2015, 84 : 325 - 339
  • [45] Automated assessment of ultimate hull girder strength
    Smith, MJ
    Pegg, NG
    JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME, 2003, 125 (03): : 211 - 218
  • [46] Ultimate strength assessment of corroded box girders
    Saad-Eldeen, S.
    Garbatov, Y.
    Guedes Soares, C.
    OCEAN ENGINEERING, 2013, 58 : 35 - 47
  • [47] Longitudinal strength problems in design of ships for loading nodules at sea
    Cepowski, Tomasz
    SCIENTIFIC JOURNALS OF THE MARITIME UNIVERSITY OF SZCZECIN-ZESZYTY NAUKOWE AKADEMII MORSKIEJ W SZCZECINIE, 2014, 39 (111): : 53 - 56
  • [48] COMPUTING METHODS AND APPLICATION DEVELOPMENT OF LONGITUDINAL STRENGTH OF DAMAGED SHIPS
    Yan Renjun
    Qi Yao
    Luo Bailu
    Lei Jiajing
    Li Peng
    PROCEEDINGS OF THE ASME 29TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING 2010, VOL 2, 2010, : 689 - 694
  • [49] Effect of longitudinal stress gradient on the ultimate strength of thin plates
    Yu, Cheng
    Schafer, Benjamin W.
    THIN-WALLED STRUCTURES, 2006, 44 (07) : 787 - 799
  • [50] Evaluation of ultimate strength of stiffened panels under longitudinal thrust
    Tanaka, Satoyuki
    Yanagihara, Daisuke
    Yasuoka, Aya
    Harada, Minoru
    Okazawa, Shigenobu
    Fujikubo, Masahiko
    Yao, Tetsuya
    MARINE STRUCTURES, 2014, 36 : 21 - 50