A guide for the ultimate longitudinal strength assessment of ships

被引:0
|
作者
Paik, JK [1 ]
机构
[1] Pusan Natl Univ, Dept Naval Architecture & Ocean Engn, Pusan 609735, South Korea
来源
MARINE TECHNOLOGY AND SNAME NEWS | 2004年 / 41卷 / 03期
关键词
D O I
暂无
中图分类号
P75 [海洋工程];
学科分类号
0814 ; 081505 ; 0824 ; 082401 ;
摘要
The aim of the present paper is to establish a practical guide for the ultimate longitudinal strength assessment of ships. The ultimate hull girder strength of a ship hull can be calculated using either the progressive collapse analysis method or closed-form design formulas. In the present paper, both the progressive collapse analysis method and the design formulas are presented. A comparison between the progressive collapse analysis results and the design formula solutions for merchant cargo ship hulls is undertaken. The total design (extreme) bending moment of a ship hull is estimated as the sum of the still-water and wave-induced bending moment components as usual. The safety measure of a ship hull is then defined as a ratio of the ultimate longitudinal strength to the total design bending moment. The developed guidelines are applied to safety measure calculations of merchant ship hulls with respect to hull girder collapse. It is concluded that the guidance and insights developed from the present study will be very useful for the ultimate limit state design of newly built ships as well as the safety measure calculations of existing ship hulls. The essence of the proposed guide shall form ISO code 18072-2: Ships and Marine Technology-Ship Structures-Part 2: Requirements of Their Ultimate Limit State Assessment.
引用
收藏
页码:122 / 139
页数:18
相关论文
共 50 条
  • [31] A discussion of the ultimate strength of ageing ships, with particular reference to the corrosion model
    Qin, S.-P.
    Cui, W.-C.
    Proceedings of the Institution of Mechanical Engineers Part M: Journal of Engineering for the Maritime Environment, 2002, 216 (02) : 155 - 160
  • [32] Key Influencing Factors in Ultimate Strength Analysis for Large Container Ships
    Cui, Jinju
    Wang, Deyu
    Ma, Ning
    INTERNATIONAL JOURNAL OF OFFSHORE AND POLAR ENGINEERING, 2019, 29 (01) : 85 - 96
  • [33] Ultimate strength of composite ships' hull girders in the presence of composite superstructures
    Morshedsoluk, Fattaneh
    Khedmati, Mohammad Reza
    THIN-WALLED STRUCTURES, 2016, 102 : 122 - 138
  • [34] Simplified Approach on the Ultimate Hull Girder Strength of Asymmetrically Damaged Ships
    Alie, Muhammad Zubair Muis
    INTERNATIONAL JOURNAL OF OFFSHORE AND POLAR ENGINEERING, 2018, 28 (02) : 200 - 205
  • [35] Ultimate strength and post ultimate strength behaviors of hull plates under extreme longitudinal cyclic load
    Xia, Tian
    Yang, Ping
    Song, Yueling
    Hu, Kang
    Qian, Yi
    Feng, Fan
    OCEAN ENGINEERING, 2019, 193
  • [36] Assessment of the ultimate strength of stiffened panels of ships considering uncertainties in geometrical aspects: Finite element approach and simplified formula
    Hanif, Muhammad Imaduddin
    Adiputra, Ristiyanto
    Prabowo, Aditya Rio
    Yamada, Yasuhira
    Firdaus, Nurman
    OCEAN ENGINEERING, 2023, 286
  • [37] Ultimate longitudinal strength of ship hulls of composite materials
    Chen, Nian-Zhong
    Soares, C. Guedes
    JOURNAL OF SHIP RESEARCH, 2008, 52 (03): : 184 - 193
  • [38] Ultimate Strength of Ships and Offshore Structures (vol 19, pg 509, 2020)
    Guedes Soares, Carlos
    JOURNAL OF MARINE SCIENCE AND APPLICATION, 2021, 20 (03) : 581 - 582
  • [39] STUDY ON FAILURE MODES AND ULTIMATE STRENGTH OF STIFFENED PANELS IN LARGE CRUISE SHIPS
    Zhang, Zheng
    Wu, Haolong
    Liu, Xiang
    Deng, Hui
    Gan, Jin
    Wu, Weiguo
    PROCEEDINGS OF ASME 2024 43RD INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, OMAE2024, VOL 2, 2024,
  • [40] FINITE ELEMENT ANALYSIS ON THE HULL GIRDER ULTIMATE STRENGTH OF ASYMMETRICALLY DAMAGED SHIPS
    Alie, Muhammad Zubair Muis
    Sitepu, Ganding
    Sade, Juswan
    Mustafa, Wahyuddin
    Nugraha, Andi Mursid
    Saleh, Alamsyah Bin Muh.
    PROCEEDINGS OF THE ASME 35TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING , 2016, VOL 3, 2016,