The Effects of End Part of Winding on Parasitic Capacitances of Induction Motor Fed by PWM Inverter

被引:0
作者
Li Junfeng [1 ]
Liu Ruifang [1 ]
Zheng Bohua [1 ]
Zhang Yihuang [1 ]
机构
[1] Beijing Jiaotong Univ, Sch Elect Engn, Beijing, Peoples R China
来源
2012 15TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2012) | 2012年
关键词
PWM inverter; Common-Mode Voltage; Parasitic Capacitance; Winding-End; Bearing Voltage; VOLTAGE; PREDICTION; PARAMETERS; CURRENTS;
D O I
暂无
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Parasitic capacitances of motor play a very important role in analysis of bearing current of motor caused by PWM supply. In previous papers, parasitic capacitances generally were acquired from two-dimension symmetry model of motor. The effect of stator winding-end on coupling capacitance was ignored. In this paper, mechanism of common-mode voltage was introduced and equivalent circuit of common-mode of motor was proposed. Relationship between parasitic capacitances and bearing voltage was figured out. 2D and 3D Finite-Element model of motor were established based on geometric dimension of motor respectively which includes with winding-end treatment and not. It's found that length of extended straight part of stator winding and height of squirrel-cage ring are two main factors which can affect C-sr dramatically. Optimized analysis of C-sr based on the two factors was also carried out and optimized group of parameters had been obtained to make C-sr achive the minimum value.
引用
收藏
页数:5
相关论文
共 15 条
  • [1] Adabi J., 2009, IET POWER ELECTRON, P379
  • [2] Bearing currents and their relationship to PWM drives
    Busse, D
    Erdman, J
    Kerkman, RJ
    Schlegel, D
    Skibinski, G
    [J]. IEEE TRANSACTIONS ON POWER ELECTRONICS, 1997, 12 (02) : 243 - 252
  • [3] Busse D, 1996, APPL POWER ELECT CO, P570, DOI 10.1109/APEC.1996.500498
  • [4] The effects of PWM voltage source inverters on the mechanical performance of rolling bearings
    Busse, DF
    Erdman, JM
    Kerkman, RJ
    Schlegel, DW
    Skibinski, GL
    [J]. IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 1997, 33 (02) : 567 - 576
  • [5] Gersem H. D., 2006, PROC 6 INT C COMPUT, P1
  • [6] Investigation of Influence of Bearing Load and Bearing Temperature on EDM Bearing Currents
    Magdun, Oliver
    Gemeinder, Yves
    Binder, Andreas
    [J]. 2010 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION, 2010, : 2733 - 2738
  • [7] Maki-Ontto Petri, 2005, EL MACH DRIV 2005 IE, P1653
  • [8] Techniques for measurement of parameters related to inverter-induced bearing currents
    Muetze, Annette
    Binder, Andreas
    [J]. IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2007, 43 (05) : 1274 - 1283
  • [9] Calculation of motor capacitances for prediction of the voltage across the bearings in machines of inverter-based drive systems
    Muetze, Annette
    Binder, Andreas
    [J]. IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2007, 43 (03) : 665 - 672
  • [10] Influence of Motor Operating Parameters on Discharge Bearing Current Activity
    Muetze, Annette
    Tamminen, Jussi
    Ahola, Jero
    [J]. IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2011, 47 (04) : 1767 - 1777