Conductivity enhancement of PEDOT:PSS thin film using roll to plate technique and its characterization as a Schottky diode

被引：5

作者：

Zubair, Muhammad ^{[1
]}

Duraisamy, Navaneethan ^{[1
]}

Choi, Kyung Hyun ^{[1
]}

Hyun, Myung Teak ^{[2
]}

机构：

[1] Jeju Natl Univ, Dept Mechatron Engn, Cheju 690756, South Korea

[2] Jeju Natl Univ, Dept Mech Engn, Cheju 690756, South Korea

来源：

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS | 2014年 / 25卷 / 02期

关键词：

INDIUM-TIN-OXIDE; ELECTRICAL-CONDUCTIVITY; POLYMER; MORPHOLOGY; POLY(3,4-ETHYLENEDIOXYTHIOPHENE)/POLY(STYRENESULFONATE); ELECTROLUMINESCENCE; SULFONATE); STABILITY; TRANSPORT; SOLVENT;

D O I：

10.1007/s10854-013-1683-3

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

The conductivity of poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) was improved by pressing the PEDOT:PSS thin film using roll to plate system. PEDOT:PSS thin film was deposited on polyethylene terephthalate using electrohydrodynamics atomization technique. The physico-chemical properties of the pressed thin film at different loads were compared with an un-pressed sample. The electrical properties show that the film conductivity has been increased by four times. An optimized pressing load was found to have good conductivity and transmittance of the thin film. A hybrid device (PEDOT:PSS/F8BT/ZnO/Ag) was fabricated using layer by layer method with PEDOT:PSS as anode. The I-V characterization showed that the device with pressed PEDOT:PSS showed higher current densities. The results give a promising future of PEDOT:PSS in electronics device applications using printed electronics techniques.

引用

页码：1033 / 1039

页数：7

共 50 条

[1] Printable anodes for flexible organic solar cell modules
Aernouts, T
Vanlaeke, P
Geens, W
Poortmans, J
Heremans, P
Borghs, S
Mertens, R
Andriessen, R
Leenders, L
[J]. THIN SOLID FILMS, 2004, 451 : 22 - 25
[2] Conducting Polymers and Their Applications to Biosensors: Emphasizing on Foodborne Pathogen Detection
Arshak, Khalil
Velusamy, Vijayalakshmi
Korostynska, Olga
Oliwa-Stasiak, Kamila
Adley, Catherine
[J]. IEEE SENSORS JOURNAL, 2009, 9 (12) : 1942 - 1951
[3] Effects of solvent on carrier transport in poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate)
Ashizawa, S
Horikawa, R
Okuzaki, H
[J]. SYNTHETIC METALS, 2005, 153 (1-3) : 5 - 8
[4] Charge Transport in Organic Semiconductors
Baessler, Heinz
Koehler, Anna
[J]. UNIMOLECULAR AND SUPRAMOLECULAR ELECTRONICS I: CHEMISTRY AND PHYSICS MEET AT METAL-MOLECULE INTERFACES, 2012, 312 : 1 - 65
[5] All-polymer RC filter circuits fabricated with inkjet printing technology
Chen, B
Cui, TH
Liu, Y
Varahramyan, K
[J]. SOLID-STATE ELECTRONICS, 2003, 47 (05) : 841 - 847
[6] ELECTRICAL-CONDUCTIVITY IN DOPED POLYACETYLENE
CHIANG, CK
FINCHER, CR
PARK, YW
HEEGER, AJ
SHIRAKAWA, H
LOUIS, EJ
GAU, SC
MACDIARMID, AG
[J]. PHYSICAL REVIEW LETTERS, 1977, 39 (17) : 1098 - 1101
[7] Effects of ultraviolet treatment on the photovoltaic property of poly(3,4-ethylenedioxythiophene) doped with poly(4-styrenesulfonate)/n-type Si diodes
Chin, Yi-Min
Lin, Jung-Chung
Lin, Yow-Jon
Wu, Kuo-Chen
[J]. SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2010, 94 (12) : 2154 - 2157
[8] Electrohydrodynamic Spray Deposition of ZnO Nanoparticles
Choi, Kyung Hyun
Khan, Saleem
Dang, Hyun Woo
Doh, Yang Hoi
Hong, Sung Jei
[J]. JAPANESE JOURNAL OF APPLIED PHYSICS, 2010, 49 (05) : 05EC081 - 05EC086
[9] Conductivity, morphology, interfacial chemistry, and stability of poly(3,4-ethylene dioxythiophene)-poly(styrene sulfonate): A photoelectron spectroscopy study
Crispin, X
Marciniak, S
Osikowicz, W
Zotti, G
Van der Gon, AWD
Louwet, F
Fahlman, M
Groenendaal, L
De Schryver, F
Salaneck, WR
[J]. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 2003, 41 (21) : 2561 - 2583
[10] Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes
de Jong, MP
van IJzendoorn, LJ
de Voigt, MJA
[J]. APPLIED PHYSICS LETTERS, 2000, 77 (14) : 2255 - 2257

← 1 2 3 4 5 →