PLA-based 3D Printed Circularly Polarized X-Band Horn Array Antenna for CP-SAR Sensor

被引：0

作者：

Wahyudi, Agus Hendra ^{[1
,2
]}

Sumantyo, Josaphat Tetuko Sri ^{[1
]}

Wijaya, Sunar ^{[2
]}

Munir, Achmad ^{[3
]}

机构：

[1] Chiba Univ, Josaphat Microwave Remote Sensing Lab, Ctr Environm Remote Sensing, Grad Sch Adv Integrat Sci, Chiba, Japan

[2] Natl Inst Aeronaut & Space, Ctr Aeronaut Technol, Bogor, Indonesia

[3] Inst Teknol Bandung, Radio Telecommun & Microwave Lab, Sch Elect Engn & Informat, Bandung, Indonesia

来源：

2018 IEEE INTERNATIONAL WORKSHOP ON ANTENNA TECHNOLOGY (IWAT) | 2018年

关键词：

Circularly polarized antenna; CP-SAR sensor; horn array antenna; polylactid-acid (PLA); X-band;

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

This paper presents a polylactid-acid (PLA) based 3D printed circularly polarized 2 x 2 X-band horn array antenna for circularly polarized synthetic aperture radar (CPSAR) sensor. The use of CP horn array antenna is to overcome some issues related with mismatch orientation and ionospheric effect of linear polarization sensor. The proposed array antenna which is intended to operate at X-band frequency is realized using PLA material through 3D printing technique and fed by series sequential feeding network implemented on a 1.6mm thick NPC-F220A dielectric substrate. From the result, it shows that the proposed CP horn array antenna has 3dB axial ratio bandwidth more than 400MHz in X-band frequency range.

引用

页数：4

共 14 条

[1] 3D Printed Linearly Polarized X-Band Conical Horn Antenna and Lens
Goode, Ian
Saavedra, Carlos E.
IEEE OPEN JOURNAL OF ANTENNAS AND PROPAGATION, 2022, 3 : 549 - 556
[2] Design of Tilted Beam Circularly Polarized Antenna for CP-SAR Sensor Onboard UAV
Yohandri
Asrizal
Sumantyo, Josaphat Tetuko Sri
2016 INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION (ISAP), 2016, : 658 - 659
[3] SLM 3D-Printed Horn Antenna for Satellite Communications at X-band
Kotze, Kobus
Gilmore, Jacki
PROCEEDINGS OF THE 2019 9TH IEEE-APS TOPICAL CONFERENCE ON ANTENNAS AND PROPAGATION IN WIRELESS COMMUNICATIONS (IEEE APWC' 19), 2019, : 148 - 153
[4] Miniaturized Circularly Polarized Horn Antenna with a Single-Arm Spiral Structure for X-band
Chen, Xiaokun
Yu, Jiaao
Peng, Shirui
PROCEEDINGS OF THE 2018 INTERNATIONAL CONFERENCE ON INFORMATION SCIENCE AND SYSTEM (ICISS 2018), 2018, : 215 - 217
[5] 3-D Printed Dually Symmetric Orthomode Transducer and Horn Antenna at X-Band
Goode, Ian
Saavedra, Carlos E.
IEEE OPEN JOURNAL OF ANTENNAS AND PROPAGATION, 2023, 4 : 383 - 391
[6] 3D printed wideband flat gain multilayer nonuniform reflectarray antenna for X-band applications
Belen, Aysu
Gunes, Filiz
Belen, Mehmet A.
Mahouti, Peyman
INTERNATIONAL JOURNAL OF NUMERICAL MODELLING-ELECTRONIC NETWORKS DEVICES AND FIELDS, 2020, 33 (06)
[7] Design and Manufactering of an X-Band Horn Antenna using 3-D Printing Technology
Toy, Yunus Can
Mahouti, Peyman
Gunes, Filiz
Belen, Mehmet A.
PROCEEDINGS OF 8TH INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN SPACE TECHNOLOGIES (RAST 2017), 2017, : 195 - 198
[8] E-band 3-D Metal Printed Wideband Planar Horn Array Antenna
Vosoogh, Abbas
Kildal, Per-Simon
Vassilev, Vessen
Zaman, Ashraf Uz
Carlsson, Stefan
2016 INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION (ISAP), 2016, : 304 - 305
[9] Low-cost 3D Printed Circularly Polarized Lens Antenna for 5.9 GHz V2X Applications
Kalista, Weronika
Leszkowska, Luiza
Rzymowski, Mateusz
Nyka, Krzysztof
Kulas, Lukasz
2023 17TH EUROPEAN CONFERENCE ON ANTENNAS AND PROPAGATION, EUCAP, 2023,
[10] 3D Printed Dielectric Circularly Polarized Lens Antenna for 5G Millimeter Wave Multibeam Application
Ao, Tianqi
Cheng, Yang
Dong, Yuandan
2024 IEEE MTT-S INTERNATIONAL WIRELESS SYMPOSIUM, IWS 2024, 2024,

← 1 2 →