Influence of a cutout on circular steel hollow sections under cyclic loading

被引：28

作者：

Ghazijahani, Tohid Ghanbari ^{[1
]}

Jiao, Hui ^{[1
]}

Holloway, Damien ^{[1
]}

机构：

[1] Univ Tasmania, Sch Engn, Hobart, Tas, Australia

来源：

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH | 2014年 / 100卷

关键词：

Steel circular sections; Tests; Fatigue life; Stress concentration relief; PLATE T-JOINTS; CYLINDRICAL-SHELLS; FATIGUE; SUBJECT; DESIGN;

D O I：

10.1016/j.jcsr.2014.04.015

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Due to extensive applications of circular hollow sections (CHS) as structural members, these steel elements are always in the focus of interest of investigators. This study reports on the effect of circular openings on the fatigue behavior of CHS members. Circular cutouts were made near the area of maximum tension stress of tube specimens. The failure mode as well as the fatigue life was explored. It was found that fatigue life and failure modes strongly depend on the position and the diameter of the opening. It was interesting that, due to the distribution of the stress concentration, a cutout with an optimal diameter helped to extend the fatigue life of a tube compared to those without the cutouts. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：12 / 20

页数：9

共 14 条

[1] Plastic limit load of cylindrical shells with cutouts subject to pure bending moment
Alashti, R. A.
Rahimi, G. H.
Poursaeidi, E.
[J]. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2008, 85 (07) : 498 - 506
[2] REDUCTION OF CONTACT STRESS BY USE OF RELIEF NOTCHES
BIJAK, M
WAAS, AM
ANDERSON, WJ
MINIATT, CE
[J]. EXPERIMENTAL MECHANICS, 1991, 31 (03) : 271 - 275
[3] Ghazijahani T. Ghanbari, 2012, BENDING EXPT THIN CY, P119, DOI 10.1007/978-3-642-22700-4_7
[4] Experiments on cylindrical shells under pure bending and external pressure
Ghazijahani, Tohid Ghanbari
Showkati, Hossein
[J]. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2013, 88 : 109 - 122
[5] Fatigue behavior of very high strength (VHS) circular steel tube to plate T-joints under in-plane bending
Jiao, Hui
Mashiri, Fidelis
Zhao, Xiao-Ling
[J]. THIN-WALLED STRUCTURES, 2013, 68 : 106 - 112
[6] Analysis and design of the prototype of a steel 1-MW wind turbine tower
Lavassas, I
Nikolaidis, G
Zervas, P
Efthimiou, E
Doudoumis, IN
Baniotopoulos, CC
[J]. ENGINEERING STRUCTURES, 2003, 25 (08) : 1097 - 1106
[7] Fatigue tests and design of thin CHS-plate T-joints under cyclic in-plane bending
Mashiri, F. R.
Zhao, X. L.
[J]. THIN-WALLED STRUCTURES, 2007, 45 (04) : 463 - 472
[8] A crack-growth arresting technique in aluminum alloy
Murdani, Anggit
Makabe, Chobin
Saimoto, Akihide
Kondou, Ryouji
[J]. ENGINEERING FAILURE ANALYSIS, 2008, 15 (04) : 302 - 310
[9] Poursaeidi E, 2004, ASIAN J CIVIL ENG BU, V5, P191
[10] Shariati M, 2012, RES J RECENT SCI, V8

← 1 2 →