Surface Acidity Effects of Al-SBA-15 Mesoporous Materials on Adsorptive Desulfurization

SBA-15 and Aluminum-substituted SBA-15 with Si/Al molar ratio 10 (Al-SBA-15(10)) mesoporous materials were directly synthesized by a hydrolysis approach and characterized by a powder X-ray diffraction (XRD), N-2 physisorption analysis and Fourier transform infrared (FTIR) etc. The relative number of hydroxyl groups was investigated by in situ FTIR systematically. The acid type and acid strength of the adsorbents were monitord by FTIR at 423 K and 673 K, respectively, utilizing pyridine as a probe. Desulfurization performances of the adsorbents were investigated via static adsorption experiment. Gas chromatography-sulfur chemiluminescence detector (GC-SCD) was employed to detect the sulfur compounds in model fuels before and after treated by the adsorbents. The calcined Al-SBA-15(10) material shows well-ordered hexagonal mesostructure and strong Lewis acid sites (L acid) and weak Bronsted acid sites (B acid). The number of hydroxy on the surface of the Al-SBA-15(10) is more than that of SBA-15, which is beneficial to further modifications such as spontaneous monolayer dispersion. Desulfurization performance of the adsorbents is affected by surface acidity of adsorbents and the constituent of model fuels (olefins, arene, etc.). The thiophene and olefins adsorbed on the B acid site of the adsorbent may occur subsequently alkylation reactions, which may block the pores of the adsorbents and thus cause the reduction of desulfurization capacity.