Ductile iron castings fabricated using metallic moulds

被引：3

作者：

Urrestarazu, A. ^{[1
]}

Sertucha, J. ^{[2
]}

Suarez, R. ^{[2
]}

Alvarez-Ilzarbe, I. ^{[3
]}

机构：

[1] Greyco SLU, E-39409 San Felices De Buelna, Cantabria, Spain

[2] Ctr Invest Met AZTERLAN, E-48200 Durango, Bizkaia, Spain

[3] Frenos Iruna SAL, E-31191 Barbatain, Navarra, Spain

来源：

REVISTA DE METALURGIA | 2013年 / 49卷 / 05期

关键词：

Ductile iron; Metallic moulds; Structural characteristics; Mechanical properties; MECHANICAL-PROPERTIES; EUTECTOID TRANSFORMATION;

D O I：

10.3989/revmetalm.1253

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The features and suitability of high requirements ductile iron castings production using metallic moulds have been studied in the present work. The structural and mechanical properties of the produced castings have been analysed and compared to the corresponding ones but fabricated using green sand moulds according to a conventional production process. The higher cooling rate in the metallic moulds is the main cause for the appearance of the detected structural changes in castings. The mechanical and microstructural properties obtained directly on castings are remarkable due to the higher nodule count among other factors. Finally, the benefits and inconveniences found in this kind of production methodology using metallic moulds are also discussed.

引用

页码：325 / 339

页数：15

共 50 条

[41] STUDIES OF THICK-WALL DUCTILE IRON CASTINGS IN TERMS OF HETEROGENEITY OF THE STRUCTURE AND MECHANICAL PROPERTIES
Szykowny, Tadeusz
Trepczynska-Lent, Malgorzata
METAL 2017: 26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2017, : 241 - 247
[42] Effect of Wall Thickness on the Microstructure of Ductile Iron Castings Manufactured by the Inmold Process Using a Reaction Chamber
Kaminska, J.
Angrecki, M.
Stefanski, Z.
Palma, A.
ARCHIVES OF FOUNDRY ENGINEERING, 2018, 18 (04) : 50 - 54
[43] Using Cored Wires Injection 2PE-9 Method in the Production of Ferritic Si-Mo Ductile Iron Castings
Guzik, E.
Wierzchowski, D.
ARCHIVES OF FOUNDRY ENGINEERING, 2012, 12 (04) : 53 - 56
[44] Certain Aspects of Particle Distribution in Castings Formed in Rotating Moulds
Mohapatra, Shubhashree
Sarangi, Hrushikesh
Mohanty, Upendra Kumar
Rath, Priyanka
ANNALES DE CHIMIE-SCIENCE DES MATERIAUX, 2019, 43 (03): : 173 - 181
[45] Investigation of the Pearlite of Ductile Iron
Bockus, S.
Zaldarys, G.
MECHANIKA 2010: PROCEEDINGS OF THE 15TH INTERNATIONAL CONFERENCE, 2010, : 80 - 85
[46] MOLD COATINGS TO REDUCE GRAPHITE DEGENERATION IN THE SURFACE LAYER OF DUCTILE IRON CASTINGS
Ivan, N.
Chisamera, M.
Riposan, I.
INTERNATIONAL JOURNAL OF METALCASTING, 2012, 6 (04) : 61 - 70
[47] Mold Coatings to Reduce Graphite Degeneration in the Surface Layer of Ductile Iron Castings
N. Ivan
M. Chisamera
I. Riposan
International Journal of Metalcasting, 2012, 6 : 61 - 70
[48] Effect of the Quality of Furan Moulding Sand on the Skin Layer of Ductile Iron Castings
Danko, Rafal
Gorny, Marcin
Holtzer, Mariusz
Zymankowska-Kumon, Sylwia
ISIJ INTERNATIONAL, 2014, 54 (06) : 1288 - 1293
[49] ANALYSIS OF THE INFLUENCE OF THE GATING SYSTEM SHAPE ON THE FILLING AND SOLIDIFICATION OF DUCTILE IRON CASTINGS
Gryc, Karel
Socha, Ladislav
Svizelova, Jana
Prasil, Tomas
Hotovy, Ivan
Cizek, Pavel
Stefanek, Jan
31ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, METAL 2022, 2022, : 78 - 84
[50] Examples of Chunky Graphite Formation in Production of Ductile Iron Castings and Effective Countermeasures
Itofuji, Haruki
Miyamoto, Yutaka
Iwakado, Keita
Kotani, Tomokatsu
INTERNATIONAL JOURNAL OF METALCASTING, 2025, 19 (02) : 682 - 698

← 1 2 3 4 5 →