Ductile iron castings fabricated using metallic moulds

被引：3
|
作者：
Urrestarazu, A. [1 ]
Sertucha, J. [2 ]
Suarez, R. [2 ]
Alvarez-Ilzarbe, I. [3 ]
机构：
[1] Greyco SLU, E-39409 San Felices De Buelna, Cantabria, Spain
[2] Ctr Invest Met AZTERLAN, E-48200 Durango, Bizkaia, Spain
[3] Frenos Iruna SAL, E-31191 Barbatain, Navarra, Spain
来源：
REVISTA DE METALURGIA | 2013年 / 49卷 / 05期
关键词：
Ductile iron; Metallic moulds; Structural characteristics; Mechanical properties; MECHANICAL-PROPERTIES; EUTECTOID TRANSFORMATION;
D O I：
10.3989/revmetalm.1253
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The features and suitability of high requirements ductile iron castings production using metallic moulds have been studied in the present work. The structural and mechanical properties of the produced castings have been analysed and compared to the corresponding ones but fabricated using green sand moulds according to a conventional production process. The higher cooling rate in the metallic moulds is the main cause for the appearance of the detected structural changes in castings. The mechanical and microstructural properties obtained directly on castings are remarkable due to the higher nodule count among other factors. Finally, the benefits and inconveniences found in this kind of production methodology using metallic moulds are also discussed.
引用
收藏
页码：325 / 339
页数：15
相关论文
共 50 条
  • [21] Graphite degeneration in surface layer of ductile iron castings
    POLITEHNICA University of Bucharest, 313 Spl. Independentei, RO-060042, Bucharest, Romania
    Riposan, I. (riposan@foundry.pub.ro), 1600, Maney Publishing (26): : 138 - 142
  • [22] Effect of melting techniques on ductile iron castings properties
    Bockus, S
    Dobrovolskis, A
    METALURGIJA, 2006, 45 (01): : 13 - 16
  • [23] Thin Wall Ductile Iron Castings: Technological Aspects
    Fras, E.
    Gorny, M.
    Kapturkiewicz, W.
    ARCHIVES OF FOUNDRY ENGINEERING, 2013, 13 (01) : 23 - 28
  • [24] Inhomogeneous Pearlite and Ferrite in Ductile Iron Sand Castings
    Lumley, R. N.
    INTERNATIONAL JOURNAL OF METALCASTING, 2023, 17 (03) : 1467 - 1492
  • [25] Fatigue Characterization and Optimization of the Production Process of Heavy Section Ductile Iron Castings
    Foglio, E.
    Gelfi, M.
    Pola, A.
    Goffelli, S.
    Lusuardi, D.
    INTERNATIONAL JOURNAL OF METALCASTING, 2017, 11 (01) : 33 - 43
  • [26] Fatigue Characterization and Optimization of the Production Process of Heavy Section Ductile Iron Castings
    E. Foglio
    M. Gelfi
    A. Pola
    S. Goffelli
    D. Lusuardi
    International Journal of Metalcasting, 2017, 11 : 33 - 43
  • [27] Production of carbide-free thin ductile iron castings
    Sheikh, M. Ashraf
    JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING, 2008, 15 (05): : 552 - 555
  • [28] Production of carbide-free thin ductile iron castings
    M. Ashraf Sheikh
    Journal of University of Science and Technology Beijing, 2008, (05) : 552 - 555
  • [29] On the solidification sequence of ductile iron castings containing chunky graphite
    Källbom, R
    Hamberg, K
    Wessén, M
    Björkegren, LE
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 413 : 346 - 351
  • [30] Casting Ductile Iron in Layer Moulds Made from Ecological Sands
    Raczka, M.
    Gandurski, K.
    Isendorf, B.
    ARCHIVES OF FOUNDRY ENGINEERING, 2012, 12 (03) : 99 - 104
12345