Weather Radar Ground Clutter. Part II: Real-Time Identification and Filtering

The identification and mitigation of anomalous propagation (AP) and normal propagation (NP) ground clutter is an ongoing problem in radar meteorology. Scatter from ground-clutter targets routinely contaminates radar data and masks weather returns causing poor data quality. The problem is typically mitigated by applying a clutter filter to all radar data, but this also biases weather data at near-zero velocity. Modern radar processors make possible the real-time identification and filtering of AP clutter. A fuzzy logic algorithm is used to distinguish between clutter echoes and precipitation echoes and, subsequently, a clutter filter is applied to those radar resolution volumes where clutter is present. In this way, zero-velocity weather echoes are preserved while clutter echoes are mitigated. Since the radar moments are recalculated from clutter-filtered echoes, the underlying weather echo signatures are revealed, thereby significantly increasing the visibility of weather echo. This paper describes the fuzzy logic algorithm, clutter mitigation decision (CMD), for clutter echo identification. A new feature field, clutter phase alignment (CPA), is introduced and described. A detailed discussion of CPA is given in Part I of this paper. The CMD algorithm is illustrated with experimental data from the Denver Next Generation Weather Radar (NEXRAD) at the Denver, Colorado, Front Range Airport (KFTG); and NCAR's S-band dual-polarization Doppler radar (S-Pol).