Alumina-based monofoams utilizing superplastic deformation facilitated by the addition of magnesia or magnesium aluminate spinel

被引：10

作者：

Obata, Mako ^{[1
]}

Hayashi, Hidetaka ^{[1
]}

Kishimoto, Akira ^{[1
]}

机构：

[1] Okayama Univ, Grad Sch Nat Sci & Technol, Div Chem & Biochem, Okayama 7008530, Japan

来源：

JOURNAL OF ALLOYS AND COMPOUNDS | 2009年 / 471卷 / 1-2期

关键词：

Sintering; Ceramics; Oxide materials; Spinel; Grain boundary; TENSILE DUCTILITY; ZIRCONIA; CERAMICS; FABRICATION;

D O I：

10.1016/j.jallcom.2008.03.136

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

Alumina-based ceramic foam utilizing the superplastic deformation after sintering has been proposed and demonstrated by the present authors. Effects of two kinds of additives, magnesia or magnesium aluminate spinel on the. figure of alumina-based ceramic foams were examined. In both cases, total porosity increased with increasing the addition amount up to 30 mol%. With the same addition amount, the porosity of spinel-added foam was slightly larger than that of magnesia-added one. On pore expansion, relative density of pore shell decreased while the density degradation degree of magnesia-added foam was more serious than that of spinel-added one. (C) 2008 Elsevier B.V. All rights reserved.

引用

页码：L32 / L35

页数：4

共 11 条

[1] Fabrication of highly porous mullite materials
Barea, R
Osendi, MI
Miranzo, P
Ferreira, JMF
[J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2005, 88 (03) : 777 - 779
[2] The superplastic deep drawing of a fine-grained alumina-zirconia ceramic composite and its cavitation behavior
Chen, GQ
Zhang, KF
Wang, GF
Han, WB
[J]. CERAMICS INTERNATIONAL, 2004, 30 (08) : 2157 - 2162
[3] Comparison of mechanical properties of silicon nitrides with controlled porosities produced by different fabrication routes
Díaz, A
Hampshire, S
Yang, JF
Ohji, T
Kanzaki, S
[J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2005, 88 (03) : 698 - 706
[4] Porous YSZ ceramics by water-based gelcasting
Gu, YF
Liu, XQ
Meng, GY
Peng, DK
[J]. CERAMICS INTERNATIONAL, 1999, 25 (08) : 705 - 709
[5] Effect of additives on the pore evolution of zirconia based ceramic foams after sintering
Higashiwada, Tsuyoshi
Asaoka, Hiroshi
Hayashi, Hidetaka
Kishimoto, Akira
[J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2007, 27 (05) : 2217 - 2222
[6] Cavitation damage during high temperature tensile deformation in fine-grained alumina doped with magnesia or zirconia
Hiraga, K
Nakano, K
Suzuki, TS
Sakka, Y
[J]. SCRIPTA MATERIALIA, 1998, 39 (09) : 1273 - 1279
[7] Solid state foaming and free-forming of closed pore utilizing the superplasticity of zirconia ceramics
Kishimoto, A.
Higashiwada, T.
Takahara, M.
Hayashi, H.
[J]. ECO-MATERIALS PROCESSING AND DESIGN VIII, 2007, 544-545 : 641 - +
[8] The exploitation of superplasticity in the successful foaming of ceramics after sintering
Kishimoto, Akira
Higashiwada, Tsuyoshi
Asaoka, Hiroshi
Hayashi, Hidetaka
[J]. ADVANCED ENGINEERING MATERIALS, 2006, 8 (08) : 708 - 711
[9] Superplastic tensile ductility enhanced by grain size refinement in a zirconia-dispersed alumina
Nakano, K
Suzuki, TS
Hiraga, K
Sakka, Y
[J]. SCRIPTA MATERIALIA, 1997, 38 (01) : 33 - 38
[10] SAGGIOWOYANSKY J, 1992, AM CERAM SOC BULL, V71, P1674

← 1 2 →