Strengthening of timber structures with glued-in rods

被引:99
作者
Steiger, Rene [1 ]
Serrano, Erik [2 ]
Stepinac, Mislav [3 ]
Rajcic, Vlatka [3 ]
O'Neill, Caoimhe [4 ]
McPolin, Daniel [4 ]
Widmann, Robert [1 ]
机构
[1] Empa, Swiss Fed Labs Mat Sci & Technol, Struct Engn Res Lab, CH-8600 Dubendorf, Switzerland
[2] Lund Univ, Fac Engn LTH, Div Struct Mech, SE-22100 Lund, Sweden
[3] Univ Zagreb, Fac Civil Engn, Dept Struct, Zagreb 10000, Croatia
[4] Queens Univ, Civil Engn Res Ctr, Belfast BT9 5AG, Antrim, North Ireland
关键词
Reinforcement; Steel rod; FRP rod; Design; Application; Adhesive; Eurocode; 5; Quality control; Linear elastic fracture mechanics; Non-linear elastic fracture mechanics; SELF-TAPPING SCREWS; PULL-OUT STRENGTH; FLEXURAL REINFORCEMENT; BEAMS; JOINTS; CONNECTIONS; BEHAVIOR; NAILS; BARS;
D O I
10.1016/j.conbuildmat.2015.03.097
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
The research and development of connecting and strengthening timber structural elements with glued-in rods (GiR) has been ongoing since the 1980s. Despite many successful applications in practice, agreement regarding design criteria has not been reached. This state-of-the-art review summarises results from both research and practical applications regarding connections and reinforcement with GiR. The review considers manufacturing methods, mechanisms and parameters governing the performance and strength of GiR, theoretical approaches to estimate their load-bearing capacity and existing design recommendations. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码:90 / 105
页数:16
相关论文
共 50 条
[41]   Analysis of the stresses in a beam-to-column connection strengthened with glued-in rods of a three hinge timber frame [J].
Fueyo J.G. ;
Cabezas J.A. ;
Domínguez M. ;
Rubio M.P. .
Informacion Tecnologica, 2010, 21 (06) :79-90
[42]   Combined effects of axial and lateral loading for Glued-In steel rods in laminated veneer lumber [J].
Fawcett, Daniel ;
Toumpanaki, Eleni .
STRUCTURES, 2023, 57
[43]   Surface based cohesive behavior implementation for the strength analysis of glued-in threaded rods in Glulam [J].
Gecys, T. ;
Sauciuvenas, G. ;
Ustinovichius, L. ;
Miedzialowski, C. ;
Sulik, P. .
BULLETIN OF THE POLISH ACADEMY OF SCIENCES-TECHNICAL SCIENCES, 2020, 68 (05) :1149-1157
[44]   End-repair of timber beams with laterally-loaded glued-in rods: Experimental trials and failure prediction through modelling [J].
Orlando, Nicola ;
Taddia, Yuri ;
Benvenuti, Elena ;
Pizzo, Benedetto ;
Alessandri, Claudio .
CONSTRUCTION AND BUILDING MATERIALS, 2019, 195 :623-637
[45]   Experimental and numerical investigations on oak's potential: structural performance of glued-in rods compared to spruce [J].
Franck, Pascal ;
Schmidt, Jens ;
Bletz-Muehldorfer, Oliver ;
Bathon, Leander ;
Scholz, Ronja ;
Grunwald, Cordula ;
Vallee, Till ;
Voss, Morten ;
Viehoefer, Marc-Aurel ;
Walther, Frank .
JOURNAL OF ADHESION, 2025,
[46]   Seismic strengthening and seismic improvement of timber structures [J].
Parisi, Maria Adelaide ;
Piazza, Maurizio .
CONSTRUCTION AND BUILDING MATERIALS, 2015, 97 :55-66
[47]   Experimental Investigation of Axial Pull-out Behavior of Glued-in Threaded Rods in Cross-Laminated Timber [J].
Ling, Zhibin ;
Li, Zheng ;
Li, Zhoujun ;
Yang, Chao ;
Zheng, Wei ;
Zhang, Lingfeng .
BIORESOURCES, 2025, 20 (03) :5407-5428
[48]   Fatigue of glued-in rods in engineered hardwood products Part II: Numerical modelling [J].
Myslicki, S. ;
Walther, F. ;
Bletz-Muehldorfer, O. ;
Diehl, F. ;
Lavarec, C. ;
Beber, V. C. ;
Vallee, T. .
JOURNAL OF ADHESION, 2019, 95 (5-7) :702-722
[49]   Characterizing the Performance of Adhesive Used in Glued-In Rod Timber Connections at Elevated Temperatures [J].
Flores, Diego ;
Dagenais, Christian ;
Blanchet, Pierre .
JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES, 2023, 37 (04)
[50]   Fatigue of glued-in rods in engineered hardwood products part I: experimental results [J].
Myslicki, S. ;
Bletz-Muehldorfer, O. ;
Diehl, F. ;
Lavarec, C. ;
Vallee, T. ;
Scholz, R. ;
Walther, F. .
JOURNAL OF ADHESION, 2019, 95 (5-7) :675-701