Modification of the Ti-6Al-4V alloy by ion implantation of calcium and/or phosphorus

被引:18
作者
Tsyganov, I [1 ]
Wieser, E [1 ]
Matz, W [1 ]
Reuther, H [1 ]
Richter, E [1 ]
机构
[1] Forschungszentrum Rossendorf EV, Inst Ion Beam Phys & Mat Res, D-01314 Dresden, Germany
关键词
titanium alloys; ion implantation; phase formation;
D O I
10.1016/S0257-8972(02)00190-1
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Ion implantation of Ca and/or P into Ti or Ti alloys is of interest in order to enhance mechanical properties and biocompatibility for medical applications. In this study, the microstructural changes of the implanted surface layer were studied. Surface near implantation of high doses of calcium results in an oxidation of the modified layer and the formation of CaO. For deeper calcium implantations, precipitation of the metastable hexagonal modification of calcium has been observed instead of the cubic equilibrium phase. Besides these new phases, partial amorphization is observed. High dose implantation of phosphorus leads mainly to amorphization of the implanted layer. This hinders the reaction with oxygen during implantation and room temperature aging. Hi-h dose double implantation with P followed by Ca also leads to partial amorphization. No indication for new phases containing Ca and P is found. (C) 2002 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:318 / 323
页数:6
相关论文
共 10 条
[1]   Surface modification of biomedical implants using ion-beam-assisted sputter deposition [J].
Ektessabi, AM .
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 1997, 127 :1008-1014
[2]  
HANAWA T, 1994, AM SOC TEST MATER, V1196, P170, DOI 10.1520/STP25192S
[3]  
HANAWA T, 1994, COMPATIBILITY BIOMED, P126
[4]   Effect of calcium-ion implantation on the corrosion resistance and biocompatibility of titanium [J].
Krupa, D ;
Baszkiewicz, J ;
Kozubowski, JA ;
Barcz, A ;
Sobczak, JW ;
Bilinski, A ;
Lewandowska-Szumiel, M ;
Rajchel, B .
BIOMATERIALS, 2001, 22 (15) :2139-2151
[5]  
MASALSKI TB, 1986, BINARY ALLOY PHASE D
[6]   FORMATION OF HYDROXYAPATITE COATING ON PURE TITANIUM SUBSTRATES BY ION-BEAM DYNAMIC MIXING [J].
OHTSUKA, Y ;
MATSUURA, M ;
CHIDA, N ;
YOSHINARI, M ;
SUMII, T ;
DERAND, T .
SURFACE & COATINGS TECHNOLOGY, 1994, 65 (1-3) :224-230
[7]   Corrosion behavior and microstructure of titanium implanted with α and β stabilizing elements [J].
Pham, MT ;
Zyganow, I ;
Matz, W ;
Reuther, H ;
Oswald, S ;
Richter, E ;
Wieser, E .
THIN SOLID FILMS, 1997, 310 (1-2) :251-259
[8]   THE CALCIUM-STRONTIUM METAL PHASE SYSTEM [J].
SCHOTTMILLER, JC ;
KING, AJ ;
KANDA, FA .
JOURNAL OF PHYSICAL CHEMISTRY, 1958, 62 (11) :1446-1449
[9]  
Villars P., 1991, Pearson's Handbook of Crystallographic Data for Intermetallic Phases, V4
[10]   Modification of titanium by ion implantation of calcium and/or phosphorus [J].
Wieser, E ;
Tsyganov, I ;
Matz, W ;
Reuther, H ;
Oswald, S ;
Pham, T ;
Richter, E .
SURFACE & COATINGS TECHNOLOGY, 1999, 111 (01) :103-109