Resistance Spot Weldability of Deformed TRIP800 Steel

被引：0
作者：
Emre, H. E. [1 ]
Kacar, R. [1 ]
机构：
[1] Karabuk Univ, Dept Mfg Engn, Karabuk, Turkey
来源：
WELDING JOURNAL | 2016年 / 95卷 / 03期
关键词：
Resistance Spot Weld; Cold Deformation; Welding Parameters; Weld Lobe Diagram; LOW-CARBON STEEL; RETAINED AUSTENITE; MECHANICAL-PROPERTIES; ENERGY-ABSORPTION; FAILURE MODE; PEAK LOAD; WELDS; MICROSTRUCTURE; TRANSFORMATION; SHEET;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In order to simulate automotive manufacturing conditions, the spot weldability of cold -deformed, in tension by 10%, TRIP800 steels was investigated in this study. Tensile shear strength and failure mode associated with button geometry and electrode indentations were also evaluated, and weld lobe was drawn for resistance spot-welded deformed TRIP800 steel. The microstructure of the weldment was evaluated and the hardness profile of the weldment was also determined. It was found that the properties of the weldment are directly related to parameters used for the process and deformation of base metal prior to welding. It was found that the button diameter and button size ratio of deformed TRIP800 steel spot welds should be at least 4vt and 0.14-0.30, respectively, for pullout failure mode, acceptable shear strength, and surface quality.
引用
收藏
页码：77S / 85S
页数：9
相关论文
共 30 条
  • [1] Microstructural Development during Welding of Silicon- and Aluminum-Based Transformation-Induced Plasticity Steels-Inclusion and Elemental Partitioning Analysis
    Amirthalingam, M.
    Hermans, M.
    Richardson, I.
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (04): : 901 - 909
  • [2] The effect of nucleus size on mechanical properties in electrical resistance spot welding of sheets used in automotive industry
    Aslanlar, S
    [J]. MATERIALS & DESIGN, 2006, 27 (02) : 125 - 131
  • [3] TRIP-assisted steels?
    Bhadeshia, HKDH
    [J]. ISIJ INTERNATIONAL, 2002, 42 (09) : 1059 - 1060
  • [4] Development and characterisation of C-Mn-Al-Si-Nb TRIP aided steel
    Bhattacharyya, Tanmay
    Singh, Shiv Brat
    Das, Sourav
    Haldar, Arunansu
    Bhattacharjee, Debashish
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (06): : 2394 - 2400
  • [5] Bhowmick K., 2012, J MATER ENG PERFORM, V21, P280
  • [6] Bleck W., 2002, P INT C TRIP AID HIG, V1, P13
  • [7] Deformation behaviour of spot-welded high strength steels for automotive applications
    Brauser, S.
    Pepke, L. A.
    Weber, G.
    Rethmeier, M.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (26): : 7099 - 7108
  • [8] EFFECT OF PHOSPHORUS ON THE FORMATION OF RETAINED AUSTENITE AND MECHANICAL-PROPERTIES IN SI-CONTAINING LOW-CARBON STEEL SHEET
    CHEN, HC
    ERA, H
    SHIMIZU, M
    [J]. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1989, 20 (03): : 437 - 445
  • [9] Deformation behavior of TRIP and DP steels in tension at different temperatures over a wide range of strain rates
    Curtze, S.
    Kuokkala, V. -T.
    Hokka, M.
    Peura, P.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 507 (1-2): : 124 - 131
  • [10] Development of weld lobe for resistance spot-welded TRIP800 steel and evaluation of fracture mode of its weldment
    Emre, Hayriye Ertek
    Kacar, Ramazan
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 83 (9-12) : 1737 - 1747
123