The effects of interfacial bonding on mechanical properties of single-walled carbon nanotube reinforced copper matrix nanocomposites

被引：66
作者：
Lim, Byengsoo
Kim, Chul-ju
Kim, Bumjoon
Shim, Untae
Oh, Seyoung
Sung, Byung-ho
Choi, Jee-hoon
Baik, Seunghyun [1 ]
机构：
[1] Sungkyunkwan Univ, Sch Mech Engn, Suwon 440746, South Korea
[2] Sungkyunkwan Univ, Adv Inst Nanotechnol, SAINT, Suwon 440746, South Korea
来源：
NANOTECHNOLOGY | 2006年 / 17卷 / 23期
关键词：
D O I：
10.1088/0957-4484/17/23/008
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The effects of interfacial bonding on mechanical properties of single-walled carbon nanotube reinforced copper matrix nanocomposites were investigated. The nanocomposites were fabricated by means of a powder metallurgy process, which consists of mixing carbon nanotubes with matrix powder followed by hot-pressing. The mixing process was carried out by ultrasonicating the nanotubes and copper powder in ethanol. The interfacial strength between the nanotubes and the copper matrix was improved by coating the nanotubes with nickel. The displacement rate of the nanotube reinforced nanocomposites was found to increase at 200 degrees C, whereas that of the nickel-coated nanotube reinforced nanocomposites significantly decreased. The incorporation of carbon nanotubes and nickel-coated carbon nanotubes in the copper matrix composites improved tribological properties compared with those of pure copper specimens.
引用
收藏
页码：5759 / 5764
页数：6
相关论文
共 25 条
  • [1] Functionalization of carbon nanotubes by electrochemical reduction of aryl diazonium salts: A bucky paper electrode
    Bahr, JL
    Yang, JP
    Kosynkin, DV
    Bronikowski, MJ
    Smalley, RE
    Tour, JM
    [J]. JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 2001, 123 (27) : 6536 - 6542
  • [2] Carbon-nanotube-reinforced Zr52.5Cu17.9Ni14.6Al10Ti5 bulk metallic glass composites
    Bian, Z
    Pan, MX
    Zhang, Y
    Wang, WH
    [J]. APPLIED PHYSICS LETTERS, 2002, 81 (25) : 4739 - 4741
  • [3] Callister Jr WD, 2007, Materials science and engineering: an introduction
  • [4] Extraordinary strengthening effect of carbon nanotubes in metal-matrix nanocomposites processed by molecular-level mixing
    Cha, SI
    Kim, KT
    Arshad, SN
    Mo, CB
    Hong, SH
    [J]. ADVANCED MATERIALS, 2005, 17 (11) : 1377 - +
  • [5] Modification of multi-walled carbon nanotubes with fatty acid and their tribological properties as lubricant additive
    Chen, CS
    Chen, XH
    Xu, LS
    Yang, Z
    Li, WH
    [J]. CARBON, 2005, 43 (08) : 1660 - 1666
  • [6] Tribological application of carbon nanotubes in a metal-based composite coating and composites
    Chen, WX
    Tu, JP
    Wang, LY
    Gan, HY
    Xu, ZD
    Zhang, XB
    [J]. CARBON, 2003, 41 (02) : 215 - 222
  • [7] Carbon nanotube-metal-oxide nanocomposites:: Microstructure, electrical conductivity and mechanical properties
    Flahaut, E
    Peigney, A
    Laurent, C
    Marlière, C
    Chastel, F
    Rousset, A
    [J]. ACTA MATERIALIA, 2000, 48 (14) : 3803 - 3812
  • [8] Development of novel carbon nanotube reinforced magnesium nanocomposites using the powder metallurgy technique
    Goh, CS
    Wei, J
    Lee, LC
    Gupta, M
    [J]. NANOTECHNOLOGY, 2006, 17 (01) : 7 - 12
  • [9] Achieving individual-nanotube dispersion at high loading in single-walled carbon nanotube composites
    Graff, RA
    Swanson, JP
    Barone, PW
    Baik, S
    Heller, DA
    Strano, MS
    [J]. ADVANCED MATERIALS, 2005, 17 (08) : 980 - +
  • [10] Synthesis, microstructure and properties characterization of disintegrated melt deposited Mg/SiC composites
    Gupta, M
    Lai, MO
    Saravanaranganathan, D
    [J]. JOURNAL OF MATERIALS SCIENCE, 2000, 35 (09) : 2155 - 2165
123