Experience with compact tension specimens for creep crack growth measurements in weldments

被引:0
|
作者
Taylor, NG [1 ]
Rantala, JH [1 ]
Hurst, RC [1 ]
Bregani, F [1 ]
机构
[1] Inst Adv Mat, JRC, EC, Petten, Netherlands
来源
ECF 12: FRACTURE FROM DEFECTS, VOLS. I-III | 1998年
关键词
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Creep crack growth tests have been performed on CT specimens machined from weldments in 1/2Cr1/2Mo1/4V, P22 and P91 pipe sections. The test set-up and conditions need to be carefully considered to produce service representative damage. The pre-crack is best located in the specific HAZ sub-region of interest. As with conventional cross-weld creep testing of ferritic welds, temperature acceleration may be required if service-like damage is to be generated in short-term tests. Checks on the correpsondence between the experimental and theoretical values of C* demonstrate that consideration of primary creep and process zone transition times can be more important than HAZ creep properties variations.
引用
收藏
页码:351 / 356
页数:6
相关论文
共 50 条
  • [21] SPECIMEN GEOMETRY EFFECTS ON CREEP CRACK INITIATION AND GROWTH IN PARENT MATERIALS AND WELDMENTS
    Davies, Catrin M.
    Wimpory, Robert C.
    Dean, David W.
    Nikbin, Kamran M.
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, PVP 2011, VOL 6, A AND B, 2012, : 153 - 161
  • [22] Interpretation of creep crack growth data for 1/2 CMV steel weldments
    Ejaz, Muneeb
    Davies, Catrin M.
    Dean, David W.
    21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21), 2016, 2 : 903 - 910
  • [23] Characterization of incubation time on creep crack growth for weldments of P92
    Sugiura, Ryuji
    Yokobori, A. Toshimitsu, Jr.
    Suzuki, Kazuto
    Tabuchi, Masaaki
    ENGINEERING FRACTURE MECHANICS, 2010, 77 (15) : 3053 - 3065
  • [24] Three-dimensional numerical analysis of out-of-plane creep crack-tip constraint in compact tension specimens
    Sun, P. J.
    Wang, G. Z.
    Xuan, F. Z.
    Tu, S. T.
    Wang, Z. D.
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2012, 96-97 : 78 - 89
  • [25] Code of Practice for creep crack growth testing of industrial specimens
    GKSS Research Centre, D-21502 Geesthacht, Germany
    不详
    不详
    Strength Fract. Complex., 2006, 1 (15-34):
  • [26] Use of miniature specimens for creep-crack-growth testing
    Jaske, CE
    Viswanathan, R
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2000, 122 (03): : 327 - 332
  • [27] Use of miniature specimens for creep-crack-growth testing
    2000, American Society of Mechanical Engineers (413):
  • [28] Quantification and Prediction of Residual Stresses in Creep Crack Growth Specimens
    Mehmanparast, Ali
    Davies, Catrin M.
    Nikbin, Kamran M.
    MECHANICAL STRESS EVALUATION BY NEUTRONS AND SYNCHROTRON RADIATION VII, 2014, 777 : 25 - 30
  • [29] On single-edge-crack tension specimens for tension-compression fatigue crack growth testing
    Saxena, Ashok
    Bassi, Federico
    Nibur, Kevin
    Newman, James C., Jr.
    ENGINEERING FRACTURE MECHANICS, 2017, 176 : 343 - 350
  • [30] SPECIMEN CURVATURE AND SIZE EFFECTS ON CRACK GROWTH RESISTANCE FROM COMPACT TENSION SPECIMENS OF CANDU PRESSURE TUBES
    Williams, Bruce W.
    Tyson, William R.
    Simha, C. Hari M.
    Wasiluk, Bogdan
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2019, VOL 6A, 2019,