Fatigue crack growth behavior of ultrafine-grained nickel produced by high pressure torsion

被引：6
作者：
Leitner, T. [1 ]
Hohenwarter, A. [1 ]
Pippan, R. [2 ]
机构：
[1] Univ Leoben, Dept Mat Phys, Jahnstr 12, A-8700 Leoben, Austria
[2] Austrian Acad Sci, Erich Schmid Inst Mat Sci, A-8700 Leoben, Austria
来源：
20TH EUROPEAN CONFERENCE ON FRACTURE | 2014年 / 3卷
关键词：
High pressure torsion; Sever plastic deformation; Ultrafine-grained; Nickel; Fatigue crack growth; SEVERE PLASTIC-DEFORMATION; DEFORMED NICKEL; MICROSTRUCTURE; PROPAGATION; SATURATION; ALLOYS; METALS;
D O I：
10.1016/j.mspro.2014.06.170
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In this work the fatigue crack growth behavior of ultrafine-grained high purity nickel, produced by high pressure torsion, was studied. Fatigue crack growth curves of samples with different orientations were measured at two stress ratios. It was found that cracks propagating in two specific directions of the HPT disc show differences up to a factor of four in their fatigue crack growth rate and also deviations in their Delta K-th values. By the analysis of stereophotogrammetric images of the fracture surfaces, crack branching and crack deflection were found to be active crack tip shielding mechanisms. Only a small influence of the stress ratio has been observed. (C) 2014 Elsevier Ltd.
引用
收藏
页码：1044 / 1049
页数：6
相关论文
共 50 条
  • [41] Fatigue crack growth behavior in ultrafine grained low carbon steel
    Ho-Kyung Kim
    Myung-Il Choi
    Chin-Sung Chung
    Dong-Hyuk Shin
    KSME International Journal, 2002, 16 : 1246 - 1252
  • [42] Anisotropic fracture behavior of ultrafine-grained iron
    Hohenwarter, A.
    Pippan, R.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (10-11): : 2649 - 2656
  • [43] Microstructure and mechanical properties of ultrafine-grained aluminum consolidated by high-pressure torsion
    Khajouei-Nezhad, Mohammad
    Paydar, Mohammad Hossein
    Ebrahimi, Ramin
    Jenei, Peter
    Nagy, Peter
    Gubicza, Jeno
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 682 : 501 - 508
  • [44] The influence of graphene oxide on the microstructure and properties of ultrafine-grained copper processed by high-pressure torsion
    Emerla, Maria
    Bazarnik, Piotr
    Huang, Yi
    Wojciechowska, Anita
    Ciemiorek, Marta
    Pura, Jaroslaw
    Wieczorek-Czarnocka, Monika
    Kenichi, Purbayanto Muhammad Abiyyu
    Ebska, Agnieszka Jastrz
    Lewandowska, Malgorzata
    Langdon, Terence G.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2024, 1005
  • [45] Homogeneity of ultrafine-grained copper deformed by high-pressure torsion characterized by positron annihilation and microhardness
    Cizek, J.
    Melikhova, O.
    Janecek, M.
    Srba, O.
    Barnovska, Z.
    Prochazka, I.
    Dobatkin, S.
    SCRIPTA MATERIALIA, 2011, 65 (02) : 171 - 174
  • [46] High-Cycle Fatigue Behavior of the Ultrafine-Grained Commercially Pure Zirconium by ECAP plus RS Process
    Yang Xirong
    Liu Feng
    Leo Lei
    Feng Guanghai
    Liu Xiaoyan
    Zhao Xicheng
    RARE METAL MATERIALS AND ENGINEERING, 2019, 48 (08) : 2609 - 2615
  • [47] Extrinsic and intrinsic fracture behavior of high pressure torsion deformed nickel
    Rathmayr, Georg B.
    Pippan, Reinhard
    SCRIPTA MATERIALIA, 2012, 66 (08) : 507 - 510
  • [48] Fatigue Crack Propagation Behavior of Ultrafine Grained Pure Titanium
    Liu X.
    Liu K.
    Yang X.
    Wang J.
    Luo L.
    Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2020, 34 (06): : 417 - 424
  • [49] Orientation imaging microscopy of ultrafine-grained nickel
    Zhilyaev, AP
    Kim, BK
    Nurislamova, GV
    Baró, MD
    Szpunar, JA
    Langdon, TG
    SCRIPTA MATERIALIA, 2002, 46 (08) : 575 - 580
  • [50] Fatigue resistance of titanium with ultrafine-grained structure
    Semenova, I. P.
    Salimgareeva, G. Kh.
    Latysh, V. V.
    Kunavin, S. A.
    Valiev, R. Z.
    METAL SCIENCE AND HEAT TREATMENT, 2009, 51 (1-2) : 87 - 91
12345