The effect of the adherend width on the strength of adhesively bonded single-lap joint: Experimental and numerical analysis

被引:63
作者
Gultekin, Kursat [1 ]
Akpinar, Salih [2 ]
Ozel, Adnan [1 ]
机构
[1] Ataturk Univ, Dept Mech Eng, TR-25240 Erzurum, Turkey
[2] Erzurum Tech Univ, Dept Mech Eng, TR-25050 Erzurum, Turkey
关键词
Stress concentrations; Strength; Finite element analysis (FEA); Mechanical testing; Joints/joining; BI-ADHESIVE; OVERLAP LENGTH; SPEW FILLET; STRESS DISTRIBUTIONS; OPTIMIZATION; GEOMETRY; FAILURE;
D O I
10.1016/j.compositesb.2014.01.022
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In the present study, mechanical properties of different Single Lap Joint (SLJ) configurations with different adherent width values subjected to tensile loading were investigated experimentally and numerically. Using AA2024-T3 aluminum alloy as adherend and DP460 as paste adhesive, eight different types of single-lap joint samples (width of the adherent was 5, 10, 15,20 or 25 m; overlap length was 5,10, 15, 20 or 25 mm) were produced for experimental studies. Stress analyses in the SLJ were performed non-linear finite element method by considering the geometrical non-linearity and the material non-linearities of the adhesive (DP460) and adherend (AA2024-T3). As a result, in SLJ geometries, increasing the adherent width raises the load-carrying capacity of the joints higher when compared to increasing overlap length. The failure load value of the joint increases as the area of bonding varies from rectangle to square. In addition, it was found that the data obtained from finite element analysis were coherent with experimental results. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码:736 / 745
页数:10
相关论文
共 33 条
[1]  
Adams R.D., 1974, J STRAIN ANAL, V9, P185, DOI [10.1243/03093247V093185, DOI 10.1243/03093247V093185]
[2]   THE INFLUENCE OF LOCAL GEOMETRY ON THE STRENGTH OF ADHESIVE JOINTS [J].
ADAMS, RD ;
HARRIS, JA .
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 1987, 7 (02) :69-80
[3]   The Effects of Width on the Strength of Adhesively Bonded Z Joints Subjected to Tensile Loads [J].
Adin, Hamit ;
Turgut, Aydin .
JOURNAL OF ADHESION, 2013, 89 (01) :1-18
[4]   A study on 3-D stress distributions in the bi-adhesively bonded T-joints [J].
Akpinar, Salih ;
Aydin, Murat Demir ;
Ozel, Adnan .
APPLIED MATHEMATICAL MODELLING, 2013, 37 (24) :10220-10230
[5]   The effect of the spew fillet on an adhesively bonded single-lap joint subjected to bending moment [J].
Akpinar, Salih ;
Doru, Muhammet Onur ;
Ozel, Adnan ;
Aydin, Murat Demir ;
Jahanpasand, Hamed Ghaffarzadeh .
COMPOSITES PART B-ENGINEERING, 2013, 55 :55-64
[6]   Effects of Different Curvature Patches on the Strength of Double-Strap Adhesive Joints [J].
Akpinar, Salih .
JOURNAL OF ADHESION, 2013, 89 (12) :937-947
[7]   A SIMPLE STRESS-ANALYSIS METHOD FOR ADHESIVE BONDED TAPERED JOINTS [J].
AMIJIMA, S ;
FUJII, T .
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 1989, 9 (03) :155-160
[8]  
ANSYS, 2012, GEN PURP FIN EL SOFT
[9]   INFLUENCE OF THE SPEW FILLET AND OTHER PARAMETERS ON THE STRESS-DISTRIBUTION IN THE SINGLE LAP JOINT [J].
CROCOMBE, AD ;
ADAMS, RD .
JOURNAL OF ADHESION, 1981, 13 (02) :141-155
[10]   Techniques to reduce the peel stresses in adhesive joints with composites [J].
da Silva, Lucas F. M. ;
D Adams, R. .
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2007, 27 (03) :227-235