Effect of Addition of Al2O3-SiO2 Gel Powder on Strength of Al2O3-MgO Unfired Bricks

被引:2
|
作者
Wei, Juncong [1 ]
Liu, Shuxian [1 ]
Niu, Sensen [1 ]
Ma, Weiping [2 ]
Tu, Junbo [1 ]
机构
[1] Hebei United Univ, Hebei Prov Key Lab Inorgan Nonmetall Mat, Tangshan 063009, Hebei, Peoples R China
[2] Tangshan Guoliang Refractory co Ltd, Tangshan 063000, Peoples R China
来源
ADVANCED ENGINEERING MATERIALS III, PTS 1-3 | 2013年 / 750-752卷
关键词
Al2O3-SiO2 gel powder; Al2O3-MgO unfired brick; Strength;
D O I
10.4028/www.scientific.net/AMR.750-752.546
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Al2O3-MgO unfired brick were prepared by using brown corundum, white corundum, fused magnesia and alpha-Al2O3 as main starting materials, Al2O3-SiO2 gel powder as a binder. The effects of Al2O3-SiO2 gel powder on the strength of Al2O3-MgO unfired bricks were investigated. The phase composition was characterized by X-ray diffraction (XRD). The results showed that with an increase of Al2O3-SiO2 gel powder content, room temperature strength first increased and then decreased, and reached an optimum value at 5.5% addition. The hot modulus of rupture continuously increased. This mainly was related to the reactivity of Al2O3-SiO2 gel powder and the formation of mullite at high temperature.
引用
收藏
页码:546 / +
页数:2
相关论文
共 50 条
  • [31] Kinetics of geopolymerization:: Role of Al2O3 and SiO2
    De Silva, P.
    Sagoe-Crenstil, K.
    Sirivivatnanon, V.
    CEMENT AND CONCRETE RESEARCH, 2007, 37 (04) : 512 - 518
  • [32] Effect of Al2O3 nano/micro powder ratio on microstructures and properties of microporous MgO-MgAl2O4 refractory aggregates
    Han, Zheng
    Yan, Wen
    Liu, Ying
    Song, Jingwen
    Chen, Qianlin
    Wang, Xiao
    CERAMICS INTERNATIONAL, 2024, 50 (24) : 53771 - 53779
  • [33] Effect of the SiO2/Al2O3 and Na2O/SiO2 ratios on the properties of geopolymers based on MK
    Rodriguez, Erich
    Mejia de Gutierrez, Ruby
    Bernal, Susan
    Gordillo, Marisol
    REVISTA FACULTAD DE INGENIERIA-UNIVERSIDAD DE ANTIOQUIA, 2009, (49): : 30 - 41
  • [34] Effects of Al ion implantation on the strength of Al2O3 particles
    Ogiso, Hisato
    Yoshida, Mikiko
    Nakano, Shizuka
    Akedo, Jun
    SURFACE & COATINGS TECHNOLOGY, 2007, 201 (19-20) : 8180 - 8184
  • [35] Tunnelling cracks in Al2O3/Al2O3-ZrO2 layered composites
    Klopcic, S. Beranic
    Ambrozic, M.
    Kosmac, T.
    Novak, S.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2007, 27 (2-3) : 1333 - 1337
  • [36] Effect of Y2O3 and CeO2 on the crystallisation behaviour and mechanical properties of glass-ceramics in the system MgO/Al2O3/SiO2/ZrO2
    Gawronski, Antje
    Patzig, Christian
    Hoeche, Thomas
    Ruessel, Christian
    JOURNAL OF MATERIALS SCIENCE, 2015, 50 (04) : 1986 - 1995
  • [37] Effects of sintering temperature on the microstructural properties of Al2O3-Y2O3 powder mixtures
    Abali, Serkan
    Kilic, Songul
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2021, 112 (06) : 430 - 438
  • [38] Joining ZTA ceramic by using Dy2O3-Al2O3-SiO2 glass ceramic filler
    Guo, Chaohui
    Zhu, Weiwei
    Shen, Yuanxun
    Sui, Qi
    Liu, Yaodong
    Ran, Xu
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2020, 40 (15) : 5819 - 5828
  • [39] Effect of Yb2O3 addition on Si3N4-Lu2O3-SiO2 ceramics
    Kondo, Naoki
    Hyuga, Hideki
    Yoshida, Katsumi
    Kita, Hideki
    Ohji, Tatsuki
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2006, 114 (1335) : 1097 - 1099
  • [40] Effect of alumina bubbles with and without Al2O3 coatings on the performance of lightweight Al2O3-MgAl2O4 refractories
    Xin, YaLou
    Yin, HongFeng
    Tang, Yun
    Yuan, HuDie
    Ren, XiaoHu
    Gao, Kui
    Wan, QiFa
    Liu, YuChi
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2020, 17 (06) : 2622 - 2628