Iterative MMSE-DFE Equalizer for the High Data Rates HF Waveforms in the HF Channel

several researches investigate the performance of the conventional adaptive equalizers for the medium data rates HF waveforms (up to 8 PSK) and show that they are suitable for mitigating the HF channel. However, the performance of these types of equalizers is very bad for the high data rates HF waveforms (up to 64QAM). Most of the later researches in the high data rates HF waveforms are based on the soft turbo equalizers which are very complicated. In this paper, we try to design the lowest complex equalizer can mitigate the HF channel for the high data rates waveforms. We investigate the performance of the minimum mean square error decision feedback equalizer (MMSE-DFE) indirectly adaptive through channel estimation based on least square estimation (LS). We show that the basic performance of the MMSE-DFE cannot satisfy the standard requirements, and then we introduce two additional enhancements. First, an effective channel estimation technique (double estimation) is proposed. The new estimator shows a clear performance enhancement over simple least square estimation with linear interpolation (about 3 dB gain at 1e-5 BER for the 64QAM). The second enhancement is to use the iterative structure through decoder using the same conventional equalizer and decoder and this gives another 3 dB gain at 1e-5 BER for the 64QAM. Iterative structure is less complicated than turbo equalizers for sure, as turbo equalizers require a lot of changes in the equalizer, decoder and demapper blocks to be SISO modules. Final equalizer model satisfies all the strict requirements of both (STANAG 4539 annex B) and (MIL-STD-188-110B app. C) standards under the ITU-R Poor channel conditions. In addition, we compare our performance with two different vendors of HF modems and other different research and show that our performance is very competitive.