Study on Cutting Mechanism and Cutting Performance of Machining for Curved Surface by Ball End Mill using 3D-CAD

被引：2

作者：

Iwabe, Hiroyasu ^{[1
]}

Miwa, Hideki ^{[2
]}

机构：

[1] Niigata Univ, Grad Sch Sci & Technol, Nishi Ku, Niigata 9502181, Japan

[2] Niigata Transys Co, Seirou Town 9570101, Japan

来源：

JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING | 2008年 / 2卷 / 04期

关键词：

Ball End Mill; Cutting Mechanism; 3D-CAD; Chip Area; Curved Surface; Cutting Performance; Looped Cutter Path Machining Method;

D O I：

10.1299/jamdsm.2.513

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper deals with the cutting mechanism and cutting performance by ball end milling of curved surface. Firstly, the modeling of a cutter and a workpiece with a concave curved surface are carried out using 3D-CAD. Secondly, the chip area is calculated by the interference of the rake surface and the chip volume removed by a single cutting operation. The maximum chip area shows transitional phenomenon, then a new cutting method such as a looped cutter path machining is proposed and the effectiveness of the new method is considered and verified using the evaluation value which is calculated by the multiplication of the chip and the length from Z axis to the gravity of the chip area.

引用

页码：513 / 521

页数：9

共 22 条

[1]

Fujii Y., 1982, J JAPAN SOC PREC ENG, V48, P649

[2]

FUJII Y, 1988, J JSPE, V54, P2301

[3]

HAO M, 1999, J JSPE, V65, P1476

[4]

Hosoi, 1978, T JPN SOC MECH ENG, V44, P722, DOI [10.1299/kikai1938.44.722, DOI 10.1299/KIKAI1938.44.722]

[5]

IWABA H, 1998, J JAPAN SOC PRECISIO, V64, P808

[6] Analysis of cutting mechanism by ball end mill using 3D-CAD (Chip area by inclined surface machining and cutting performance based on evaluation value) [J].

Iwabe, H ;

Shimizu, K ;

Sasaki, M .

JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING, 2006, 49 (01) :28-34

[7]

Iwabe H., 2003, T JAPAN SOC MECH E C, V69, P3116

[8]

KASAHARA K, 2003, J JSPE, V69, P396

[9]

Kikkawa K, 2003, J JSPE, V69, P407

[10]

KISHINAMI T, 1981, J JSPE, V47, P459

← 1 2 3 →