Characterization of heated atomic force microscope cantilevers in air and vacuum

被引：0

作者：

Lee, Jungchul ^{[1
]}

Abel, Mark ^{[1
]}

Wright, Tanya L. ^{[1
]}

Sunden, Erik ^{[1
]}

Marchenkov, Alexei ^{[1
]}

Graham, Samuel ^{[1
]}

King, William P. ^{[1
]}

机构：

[1] Georgia Inst Technol, George W Woodruff Sch Mech Engn, Atlanta, GA 30332 USA

来源：

Advances in Electronic Packaging 2005, Pts A-C | 2005年

关键词：

atomic force microscopy (AFM); microelectromechanical systems (MEMS); thermometry; vacuum measurement; Knudsen flow;

D O I：

10.1115/IPACK2005-73456

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper presents characterization of heated atomic force microscope (AFM) cantilevers in air and helium, both at atmospheric pressure and in a partially evacuated environment. The cantilevers are made of doped single-crystal silicon using a standard silicon-on-insulator cantilever fabrication process. The electrical measurements show the link between the cantilever temperature-dependant electrical characteristics, electrical resistive heating, and thermal properties of the heated AFM cantilever and its surroundings. Laser Raman thermometry measures temperature along the cantilever with resolution near 1 mu m and 4 degrees C. By modulating the gaseous environment surrounding the cantilever, it is possible to estimate the microscale thermal coupling between the cantilever and its environment. This work seeks to improve the calibration and design of heated AFM cantilevers.

引用

页码：1767 / 1772

页数：6

共 50 条

[1] Temperature calibration of heated silicon atomic force microscope cantilevers
Nelson, B. A.
King, W. P.
SENSORS AND ACTUATORS A-PHYSICAL, 2007, 140 (01) : 51 - 59
[2] Frequency-dependent electrical and thermal response of heated atomic force microscope cantilevers
Park, Keunhan
Lee, Jungchul
Zhang, Zhuomin M.
King, William P.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 2007, 16 (02) : 213 - 222
[3] Active atomic force microscope cantilevers with integrated device layer piezoresistive sensors
Ruppert, Michael G.
Fleming, Andrew J.
Yong, Yuen K.
SENSORS AND ACTUATORS A-PHYSICAL, 2021, 319
[4] An atomic force microscope integrated with a helium ion microscope for correlative nanoscale characterization
Andany, Santiago H.
Hlawacek, Gregor
Hummel, Stefan
Brillard, Charlene
Kanguel, Mustafa
Fantner, Georg E.
BEILSTEIN JOURNAL OF NANOTECHNOLOGY, 2020, 11 : 1272 - 1279
[5] An atomic force microscope integrated with a helium ion microscope for correlative nanoscale characterization
Andany S.H.
Hlawacek G.
Hummel S.
Brillard C.
Kangül M.
Fantner G.E.
Beilstein Journal of Nanotechnology, 2020, 11 : 1272 - 1279
[6] Atomic force microscopy cantilevers for sensitive lateral force detection
Kageshima, M
Ogiso, H
Nakano, S
Lantz, MA
Tokumoto, H
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 1999, 38 (6B): : 3958 - 3961
[7] DESIGN, FABRICATION AND CHARACTERIZATION OF ACTIVE ATOMIC FORCE MICROSCOPE CANTILEVER ARRAYS
Soleymaniha, Mohammadreza
Coskun, M. Bulut
Nasrabadi, Hazhir Mahmoodi
Alipour, Afshin
Moheimani, S. O. Reza
2021 34TH IEEE INTERNATIONAL CONFERENCE ON MICRO ELECTRO MECHANICAL SYSTEMS (MEMS 2021), 2021, : 883 - 886
[8] Characterization of cell elasticity correlated with cell morphology by atomic force microscope
Guo, Qiuquan
Xia, Ying
Sandig, Martin
Yang, Jun
JOURNAL OF BIOMECHANICS, 2012, 45 (02) : 304 - 309
[9] Surface topography characterization using an atomic force microscope mounted on a coordinate measuring machine
De Chiffre, L
Hansen, HN
Kofod, N
CIRP ANNALS 1999 - MANUFACTURING TECHNOLOGY, 1999, : 463 - 466
[10] Creation and Characterization of Nanoscale Ribbons on MoS2 by Atomic Force Microscope Nanolithography
Guo, Yangyang
Sun, Jing
Wang, Cheng
Yang, Yanni
Wang, Junjie
ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY, 2024, 13 (07)

← 1 2 3 4 5 →