MICROSTRUCTURE EVOLUTION AND MECHANICAL PROPERTIES OF C-Mn COLD ROLLED DUAL PHASE STEEL AFTER CONTINUOUS ANNEALING PROCESS IN LABORATORY CONDITIONS

被引：4
作者：
Sebek, M. [1 ]
Hornak, P. [1 ]
Zimovcak, P. [2 ]
Longauer, S. [1 ]
机构：
[1] Tech Univ Kosice, Fac Met, Dept Mat Sci, Kosice, Slovakia
[2] US Steel Kosice Sro, Kosice 04454, Slovakia
来源：
ARCHIVES OF METALLURGY AND MATERIALS | 2014年 / 59卷 / 02期
关键词：
dual phase steel; microstructure; annealing simulation; TEM observations; nanoindentation method;
D O I：
10.2478/amm-2014-0140
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The article deals with the influence of annealing parameters on evolution of microstructure and mechanical properties of dual phase steel. Dual phase steel was annealed in laboratory conditions according to the three chosen cycles of annealing: into intercritical region (780 degrees C), into austenite region (920 degrees C) and into austenite region (920 degrees C) by subsequently cooling into intercritical region (780 degrees C) with the hold at the temperature of 495 degrees C. Simulation of annealing regimes by thermo-mechanical simulator Gleeble was done. The obtained microstructure consists from three phases: ferritic matrix, martensite and martensite/bainite grains. For the microstructure identification the TEM and nanoindentation experiments were performed.
引用
收藏
页码：821 / 824
页数：4
相关论文
共 12 条
  • [1] [Anonymous], TEORIA ZVARITELNOSTI
  • [2] Separation of size-dependent strengthening contributions in fine-grained Dual Phase steels by nanoindentation
    Delince, M.
    Jacques, P. J.
    Pardoen, T.
    [J]. ACTA MATERIALIA, 2006, 54 (12) : 3395 - 3404
  • [3] Demir B., 2008, MAT PROCESS TECHNOL, V208, P647
  • [4] Effect of continuous annealing parameters on the microstructure and magnetic property of cold rolled dual phase steel
    Gao, Li
    Song, Qiuhong
    Yuan, Junting
    [J]. NEW MATERIALS AND PROCESSES, PTS 1-3, 2012, 476-478 : 241 - 247
  • [5] International Iron and Steel Institute Committee on Automotive Applications Advanced High Strength Steel (AHSS), ADV HIGH STRENGTH ST
  • [6] New Trends in Advanced High Strength Steel Developments For Automotive Application
    Kwon, Ohjoon
    Lee, Kyooyoung
    Kim, Gyosung
    Chin, Kwang-Geun
    [J]. THERMEC 2009, PTS 1-4, 2010, 638-642 : 136 - 141
  • [7] Microstructure Evolution and Mechanical Properties of 780 MPa Hot Dip Galvanized Dual-Phase Steel
    Li, Guo Bin
    Zhao, Zheng Zhi
    Tang, Di
    [J]. ADVANCES IN SUPERALLOYS, PTS 1 AND 2, 2011, 146-147 : 1331 - +
  • [8] Microstructure and fracture characteristics of spot-welded DP600 steel
    Ma, C.
    Chen, D. L.
    Bhole, S. D.
    Boudreau, G.
    Lee, A.
    Biro, E.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 485 (1-2): : 334 - 346
  • [9] Effect of water quenching process on microstructure and tensile properties of low alloy cold rolled dual-phase steel
    Meng, Qingge
    Li, Jun
    Wang, Jian
    Zhang, Zuogui
    Zhang, Lixiang
    [J]. MATERIALS & DESIGN, 2009, 30 (07) : 2379 - 2385
  • [10] Microstructural evolution at the initial stages of continuous annealing of cold rolled dual-phase steel
    Rocha, RO
    Melo, TMF
    Pereloma, E
    Santos, DB
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 391 (1-2): : 296 - 304
12