Analysis of changes in volume and propagation of cracks in expansive soil due to changes in water content

Expansive clay soils are a problem for agriculture and engineering because they are susceptible to change in volume due to seasonal variation in water content and temperature. One of its morphological properties is slickensides, which result from the ability to contract and crack when dry and expand by wetting. The objective of this study was to evaluate the processes of expansion and formation and propagation of cracks due to the change in water content over time. The expansion process was evaluated through simple edometric tests with different external stress values applied to undisturbed soil samples. To evaluate the shrinking process, a device was developed to monitor the process of crack propagation. The mechanisms through which cracks begin and develop were studied using molded soil samples at the liquidity limit and at 1.25 times the liquidity limit with a drying and wetting cycle. Crack initiation conditions and development of geometric crack indices were measured with the water content and drying time. The soil presented medium to high expansion that depends on the overburden and suction applied, and the swelling stress was found to increase as suction increases. The changes in volume due to wetting and the propagation of cracks due to drying developed in three stages: initial, primary, and secondary. In the initial stage, few cracks or swelling occur with gradual variation in water content. As the water content approaches the limit of soil contraction (in the drying process) or the limit of soil saturation (in the wetting process), cracks and expansion developed slowly and approach a secondary stage. In the primary stage, cracks and expansion occurred rapidly with drying or wetting, respectively. Drying and wetting cycles showed similar crack patterns with the appearance of new micro-cracks during each new drying cycle.