Development of Medical Equipment Alarm Monitoring System

被引:1
作者
Yamashita, Yoshinori [1 ]
Ogaito, Tatoku [1 ]
Kasamatsu, Shingo [1 ]
机构
[1] Univ Fukui Hosp, Dept Med Informat, Fukui, Japan
来源
MEDINFO 2013: PROCEEDINGS OF THE 14TH WORLD CONGRESS ON MEDICAL AND HEALTH INFORMATICS, PTS 1 AND 2 | 2013年 / 192卷
关键词
Safety management; Medical Equipment; Device Failure;
D O I
10.3233/978-1-61499-289-9-1195
中图分类号
R19 [保健组织与事业(卫生事业管理)];
学科分类号
摘要
In a hospital, we use a large number of medical equipment. In these use, I support the safe use by the alarm such as errors from medical equipment. There is the instrument notifying of alarm in communication, but there is the instrument by a sound and the light. For the medical safety management, confirmation of the alarm is important. We thought that stability was improved by integrating alarm from the instrument of the different type. Therefore, we thought that we integrated alarm from medical equipment. We decided to transmit an alarm signal from medical equipment by adding radio module program unit. The type of the radio used IEEE 802.15.4 (ZigBee) at a point of view of low power, International Standard, simple radio equipment. This system deals with only alarm information from medical equipment and does not handle the data. However, we understood that we were helpful very much even if it was only alarm information. We were able to in this way reduce the number of incidents.
引用
收藏
页码:1195 / 1195
页数:1
相关论文
empty
未找到相关数据