Refinement mechanism and physical properties of arc melted invar alloy with different modifiers

被引：26
作者：
Chen, Cuixin [1 ,2 ,3 ]
Ma, Bin [1 ]
Liu, Baoxi [1 ,2 ,3 ]
He, Jun [1 ]
Xue, Haitao [1 ]
Zuo, Yuqiang [1 ]
Li, Xuchen [1 ]
机构：
[1] Hebei Univ Technol, Sch Mat Sci & Engn, Tianjin 300130, Peoples R China
[2] Hebei Univ Technol, Tianjin Key Lab Laminating Fabricat & Interface C, Tianjin 300130, Peoples R China
[3] Hebei Univ Technol, Res Inst Equipment Mat, Tianjin 300130, Peoples R China
来源：
MATERIALS CHEMISTRY AND PHYSICS | 2019年 / 227卷
基金：
中国国家自然科学基金;
关键词：
Invar alloy; Ti-Nb compound modifier; Cellular substructure; Dislocation density; Coefficient of thermal expansion; MICROSTRUCTURES; STABILITY;
D O I：
10.1016/j.matchemphys.2019.02.006
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Strengthening invar alloy while ensuring its low coefficient of thermal expansion by refining microstructure has been a thorny issue in recent years. In the present work, the effects of Ti, Nb and Ti-Nb compound modifier on rapid solidified microstructure and properties of invar alloy prepared by a mini-type vacuum arc melting furnace were investigated in detail. Invar alloy with uniform and fine structure was obtained by adding 0.2%Ti, 0.2%Nb or 0.2%Ti-Nb compound modifier. And the formation of cellular substructure is attributed to the supercooling condition, leading to segregation of Ni element at the cellular wall and high dislocation density at the intracellular. Results showed that Ti-Nb has the most remarkable refinement and strengthening effect compared with Ti and Nb, who can make the refinement rate of austenite grain and substructure of invar alloy up to 45% and 67.4%, respectively. Moreover, it is revealed that the coefficient of thermal expansion (CTE) of invar alloy with the addition of alloying elements is decreased, which is mainly due to lattice distortion. In addition, the addition of alloying elements is beneficial to the dislocation multiplication of the invar alloy leading the increase of dislocation density, especially for invar alloy with the addition of 0.2%Ti-Nb modifier.
引用
收藏
页码：138 / 147
页数：10
相关论文
共 28 条
  • [1] Collier J.P., 1988, SUPERALLOYS, V1988, P43
  • [2] THE EFFECT OF VARYING AL, TI, AND NB CONTENT ON THE PHASE-STABILITY OF INCONEL-718
    COLLIER, JP
    SONG, HW
    PHILLIPS, JC
    TIEN, JK
    [J]. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1988, 19 (07): : 1657 - 1666
  • [3] Friedrich H., 2006, THEORETICAL ATOMIC P
  • [4] Guillaume C.E., 1919, Proceedings of the Physical Society of London, V32, P374, DOI DOI 10.1088/1478-7814/32/1/337
  • [5] Guo N., 2012, STUDY MICROSTRUCTURA
  • [6] RAPID SOLIDIFICATION MICROSTRUCTURES IN AUSTENITIC FE-NI ALLOYS
    HAYZELDEN, C
    RAYMENT, JJ
    CANTOR, B
    [J]. ACTA METALLURGICA, 1983, 31 (03): : 379 - 386
  • [7] Hull D., 2011, Introduction to Dislocation
  • [8] Estimating grain-size distributions in nanocrystalline materials from X-ray diffraction profile analysis
    Krill, CE
    Birringer, R
    [J]. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 1998, 77 (03): : 621 - 640
  • [9] Effect of aging on microstructures and properties of Mo-alloyed Fe-36Ni invar alloy
    Liu, Hongwang
    Sun, Zhonghua
    Wang, Gongkai
    Sun, Xiaoran
    Li, Jianxin
    Xue, Feng
    Peng, Huifen
    Zhang, Yunfei
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 654 : 107 - 112
  • [10] Observation of etch pits in Fe-36wt%Ni Invar alloy
    Lu, Dong-zhu
    Wu, Min-jie
    [J]. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2014, 21 (07) : 682 - 686
123