Gas-Solid Flow in an Airlift Loop Reactor: A Cluster Structure-Dependent Drag Model

被引:1
作者
Chen, Juhui [1 ]
Meng, Cheng [1 ]
Wang, Shuai [2 ]
Song, Xiaojiao [2 ]
机构
[1] Harbin Univ Sci & Technol, Sch Mech Engn, Harbin 150080, Peoples R China
[2] Harbin Inst Technol, Sch Energy Sci & Engn, Harbin 150001, Peoples R China
基金
黑龙江省自然科学基金; 中国国家自然科学基金; 中国博士后科学基金;
关键词
Airlift loop reactor; Computational fluid dynamics; Drag coefficient; Granular temperature; FLUIDIZED-BED; CFD SIMULATION; 2-FLUID MODEL; FCC PARTICLES; MASS-TRANSFER; HYDRODYNAMICS; RISERS;
D O I
10.1002/ceat.201600104
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The hydrodynamic characteristics and heterogeneous structures in an airlift loop reactor (ALR) are analyzed by a computational fluid dynamics (CFD) approach. Based on the two-fluid model, a modified cluster structure-dependent (CSD) drag model under consideration of the cluster effects is applied to the prediction of the non-uniform flow structure in the ALR. In comparison with experimental data and the traditional drag model, the present model enables a better prediction. The distributions of the local granular temperature in different regions of the ALR are indicated. The granular temperature in the particle diffluence region was found to be higher than that in the draft tube and annular zones.
引用
收藏
页码:514 / 521
页数:8
相关论文
共 50 条
[41]   A general EMMS drag model applicable for gas-solid turbulent beds and cocurrent downers [J].
Hu, Shanwei ;
Liu, Xinhua .
CHEMICAL ENGINEERING SCIENCE, 2019, 205 :14-24
[42]   A simplified two-fluid model coupled with EMMS drag for gas-solid flows [J].
Qiu, Xiaoping ;
Wang, Limin ;
Yang, Ning ;
Li, Jinghai .
POWDER TECHNOLOGY, 2017, 314 :299-314
[43]   Coarse-grid simulations of full-loop gas-solid flows using a hybrid drag model: Investigations on turbulence models [J].
Li, Jun-Sen ;
Zhu, Li-Tao ;
Yan, Wei-Cheng ;
Bin Rashid, Taha Abbas ;
Xu, Qun-Jie ;
Luo, Zheng-Hong .
POWDER TECHNOLOGY, 2021, 379 :108-126
[44]   Coarse grid simulation of heterogeneous gas-solid flow in a CFB riser with EMMS drag model: Effect of inputting drag correlations [J].
Zhou, Quan ;
Wang, Junwu .
POWDER TECHNOLOGY, 2014, 253 :486-495
[45]   CPFD modeling and experimental validation of gas-solid flow in a down flow reactor [J].
Lanza, A. ;
Islam, M. A. ;
de Lasa, H. .
COMPUTERS & CHEMICAL ENGINEERING, 2016, 90 :79-93
[46]   A CFD-PBM-EMMS integrated model applicable for heterogeneous gas-solid flow [J].
Hu, Shanwei ;
Liu, Xinhua .
CHEMICAL ENGINEERING JOURNAL, 2020, 383
[47]   Effective drag coefficient investigation in the acceleration zone of an upward gas-solid flow [J].
Mabrouk, R. ;
Chaouki, J. ;
Guy, C. .
CHEMICAL ENGINEERING SCIENCE, 2007, 62 (1-2) :318-327
[48]   Evaluation of multifluid model for heat transfer behavior of binary gas-solid flow in a downer reactor [J].
Shu, Zhan ;
Wang, Junwu ;
Zhou, Quan ;
Fan, Chuigang ;
Li, Songgeng .
POWDER TECHNOLOGY, 2015, 281 :34-48
[49]   Flow structure of the solids in gas-solid fluidized beds [J].
Mostoufi, N ;
Chaouki, J .
CHEMICAL ENGINEERING SCIENCE, 2004, 59 (20) :4217-4227
[50]   Numerical Simulation of the gas-solid flow in a Mini-Riser Reactor [J].
Shuai, Qun ;
Niu, Genlin ;
Zhao, Hui ;
Li, Qiang .
ADVANCES IN CHEMICAL ENGINEERING, PTS 1-3, 2012, 396-398 :356-+