Modification of the wettability of a polymeric substrate by pH effect. Determination of the surface acid dissociation constant by contact angle measurements

The wetting properties of a substrate can be changed by chemical reaction. Here, we studied simple materials with acid-base properties, by preparing poly(vinyl chloride) films containing lauric acid. These substrates constitute simple polymeric surfaces the wettability of which can be easily controlled by the acid-base equilibrium. The roughness of the material was then varied by adding Aerosil (hydrophobic fumed silica). We then studied the wettability of these materials toward aqueous buffer solutions between pH 2 and 12 from contact angle measurements. The variation of the contact angle of a droplet of buffer solution with the pH of the solution was described by a simple thermodynamic model requiring only two parameters. Thus, we could characterize the acid polymer by an effective surface acid dissociation constant the value of which was consistent with those obtained with a similar surface. We showed that the behavior of any substrate could be described even if the surface geometry was not well-known.