New developments with design and construction of a thermal/vacuum qualified photogrammetric system

被引:5
|
作者
Parian, Jafar Amiri [1 ]
Cozzani, Alessandro [1 ]
Appolloni, Matteo [1 ]
Casarosa, Gianluca [1 ]
机构
[1] ETH, Inst Geodesy & Photogrammetry, Zurich, Switzerland
关键词
Photogrammetry; Space; Accuracy; Design; Development;
D O I
10.1016/j.isprsjprs.2008.09.012
中图分类号
P9 [自然地理学];
学科分类号
0705 ; 070501 ;
摘要
In the frame of the development of a photogrammetric system to be used in thermal/vacuum chambers at the European Space Research and Technology Centre (ESTEC) of European Space Agency (ESA) and other sites across Europe, the design of a network using micro-cameras was specified by ESA-ESTEC. A thermal/vacuum qualified photogrammetric system, which is able to work and acquire images in vacuum and at cryo-temperatures, was constructed by ESA-ESTEC Test Centre Division. The current system uses four space qualified one-mega pixel cameras and is able to measure large space structures in vacuum and at temperatures down to - 170 degrees C with a global accuracy better than I part per 100,000 in object space. Several tests aiming at the qualification of the sensors and system in terms of operation and accuracy have been carried out. Special measures have been developed and special attention has been taken into account specifically for the first application of the photogrammetric system. It is to verify the ESA's Herschel Telescope Flight Model alignment positioning. (C) 2008 International Society for Photogrammetry and Remote Sensing, Inc. (ISPRS). Published by Elsevier B.V. All rights reserved.
引用
收藏
页码:317 / 327
页数:11
相关论文
共 50 条
  • [1] Design and construction of the SuperKEKB vacuum system
    Suetsugu, Yusuke
    Kanazawa, Ken-ichi
    Shibata, Kyo
    Ishibashi, Takuya
    Hisamatsu, Hiromi
    Shirai, Mitsuru
    Terui, Shinji
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 2012, 30 (03):
  • [2] Design and construction of vacuum control system on EAST
    Wang, L.
    Zhang, Y.
    Hu, Q. S.
    Wang, X. M.
    Zhang, X. D.
    Hu, J. S.
    Yang, Y.
    Gu, X. M.
    FUSION ENGINEERING AND DESIGN, 2008, 83 (2-3) : 295 - 299
  • [3] REFRACTION CONSIDERATIONS FOR PHOTOGRAMMETRIC MEASUREMENTS IN A THERMAL VACUUM CHAMBER
    FRASER, CS
    PHOTOGRAMMETRIC RECORD, 1992, 14 (79): : 99 - 112
  • [4] Design and construction of Alborz tokamak vacuum vessel system
    Mardani, M.
    Amrollahi, R.
    Koohestani, S.
    FUSION ENGINEERING AND DESIGN, 2012, 87 (09) : 1616 - 1620
  • [5] Photogrammetric distortion measurements of antennas in a thermal-vacuum environment
    Wiktowy, M. (michael.wiktowy@space.gc.ca), 1600, Canadian Aeronautics and Space Institute (49):
  • [6] THERMAL DESIGN OF THE ITER VACUUM VESSEL COOLING SYSTEM
    Carbajo, Juan J.
    Yoder, Graydon L.
    Kim, Seokho H.
    FUSION SCIENCE AND TECHNOLOGY, 2011, 60 (01) : 150 - 155
  • [8] New developments for the design and construction of tunnels in complex rock masses
    Goricki, A
    Schubert, W
    Riedmueller, G
    INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2004, 41 (03) : 497 - 498
  • [9] Design and construction of vacuum coating system for education and training (in Thai)
    Witit-Anun, N
    Chaiyakun, S
    Jongjitta, S
    PROCEEDINGS OF 42ND KASETSART UNIVERSITY ANNUAL CONFERENCE, 2004, : 137 - 142
  • [10] NEW DEVELOPMENTS IN VACUUM ENGINEERING
    JACOBS, RB
    ZUHR, HF
    JOURNAL OF APPLIED PHYSICS, 1947, 18 (01) : 34 - 48