The Effect of Hot-Mounting on the Microstructure of an As-Quenched Auto-Tempered Low-Carbon Martensitic Steel

被引：10
|
作者：
Babu, Shashank Ramesh [1 ]
Jaskari, Matias [2 ]
Jarvenpaa, Antti [2 ]
Porter, David [1 ]
机构：
[1] Univ Oulu, Mat & Mech Engn, Ctr Adv Steels Res, Oulun 90014, Finland
[2] Univ Oulu, Kerttu Saalasti Inst, Pajatie 5, FI-85500 Nivala, Finland
来源：
METALS | 2019年 / 9卷 / 05期
基金：
欧盟地平线“2020”;
关键词：
hot-mounting; martensite; tempering; quenching; cementite; LATH MARTENSITE; MECHANICAL-PROPERTIES; PRECIPITATION; TOOLS;
D O I：
10.3390/met9050550
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of hot-mounting for metallographic studies of as-quenched low-carbon martensitic steels has been studied. Hot-mounting is typically carried out at 150-200 degrees C, i.e., a low-temperature tempering regime. Cold- and hot-mounted specimens from an as-quenched low-carbon auto-tempered steel were examined using a scanning electron microscope and their hardness levels were also compared. It was found that hot-mounting causes additional tempering that manifests as the appearance of new precipitates in those regions that are free of auto-tempered cementite. The observations were rationalized using DICTRA simulations to calculate the potential growth of cementite. Hot-mounting was also shown to cause a small but statistically significant increase in the hardness of the martensite.
引用
收藏
页数：9
相关论文
共 50 条
  • [31] Effects of heat treatment influencing factors on microstructure and mechanical properties of a low-carbon martensitic stainless bearing steel
    Li, Shaohong
    Yuan, Xiaohong
    Jiang, Wen
    Sun, Hudai
    Li, Jun
    Zhao, Kunyu
    Yang, Maosheng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 605 : 229 - 235
  • [32] Microstructure and hot deformation behaviour of high-carbon steel/low-carbon steel bimetal prepared by centrifugal composite casting
    Xu, Jianzhong
    Gao, Xingjian
    Jiang, Zhengyi
    Wei, Dongbin
    Jiao, Sihai
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 86 (1-4) : 817 - 827
  • [33] Study on the relationship between the refined hierarchical microstructure, yield strength and impact toughness of low-carbon martensitic steel at different quenching temperatures
    Wang, Di
    Yang, Shaoguang
    Jiang, Hui
    Cao, Kuo
    Xiao, Jun
    Guo, Hui
    Liu, Rongquan
    Zhao, Aimin
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 896
  • [34] Effect of cooling rate on microstructure and mechanical properties of a low-carbon low-alloy steel
    Liang, Guofang
    Tan, Qiyang
    Liu, Yingang
    Wu, Tao
    Yang, Xianliang
    Tian, Zhiqiang
    Atrens, Andrej
    Zhang, Ming-Xing
    JOURNAL OF MATERIALS SCIENCE, 2021, 56 (05) : 3995 - 4005
  • [35] Effect of tempering temperature on monotonic and low-cycle fatigue properties of a new low-carbon martensitic steel
    Yang, G.
    Xia, S. L.
    Zhang, F. C.
    Branco, R.
    Long, X. Y.
    Li, Y. G.
    Li, J. H.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 826
  • [36] Microstructure and properties of 1100 MPa grade low-carbon hot-rolled steel by laser welding
    Dong, Chen
    Zhao, Ai-min
    Wang, Xi-tao
    Pang, Qi-hang
    Wu, Hui-bin
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2018, 25 (02) : 228 - 234
  • [37] Characteristics and formation mechanism of serrated markings on the hydrogen-related quasi-cleavage fracture in as quenched low-carbon martensitic steel
    Okada, Kazuho
    Shibata, Akinobu
    Tsuji, Nobuhiro
    SCRIPTA MATERIALIA, 2023, 234
  • [38] Effect of helical rolling on the bainitic microstructure and impact toughness of the low-carbon microalloyed steel
    Derevyagina, L. S.
    Gordienko, A., I
    Surikova, N. S.
    Volochaev, M. N.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 816
  • [39] Effect of Boron on the Hot Ductility of Resulfurized Low-Carbon Free-Cutting Steel
    Liu, Hai-tao
    Chen, Wei-qing
    METAL SCIENCE AND HEAT TREATMENT, 2015, 57 (5-6) : 268 - 273
  • [40] Analysis of Dislocation Density by Direct-fitting/modified Williamson-Hall (DF/mWH) Method in Tempered Low-carbon Martensitic Steel
    Masumura, Takuro
    Uranaka, Shohei
    Matsuda, Kyosuke
    Takaki, Setsuo
    Tsuchiyama, Toshihiro
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2020, 106 (11): : 50 - 58
12345