Enhancement of Dispersion of Silica Modified with a Silane Coupling Agent in a Rubber Composite

被引:4
作者
Lee, Gyu Min [1 ,2 ]
Yoo, Jung Whan [1 ]
Lee, Ki Bong [2 ]
机构
[1] Korea Inst Ceram Engn & Technol, Ecocomposite Mat Ctr, Seoul 153801, South Korea
[2] Korea Univ, Dept Chem & Biol Engn, Seoul 136713, South Korea
关键词
Silica; Silane Coupling Agent; Modification; Hydrophobicity; Dispersion Capacity; STYRENE-BUTADIENE RUBBER; SURFACE MODIFICATION; HYDROPHOBIC SILICA; CARBON-BLACK; SBR; DEFORMATION; TEMPERATURE; PARTICLES; BEHAVIOR; FILLER;
D O I
10.1252/jcej.13we130
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Silica has been modified with decyltrimethoxysilane at various temperatures to improve the dispersion of the silica particles in a silica-rubber composite. The modified silica samples are characterized by FT-IR and Si-29 CP/MAS NMR. With increasing treatment temperature, the chemical reaction between the silanol group of silica and the methoxy group of decyltrimethoxysilane is facilitated and the silica samples demonstrate very low water vapor adsorption capacities and good hydrophobicity compared to silica. The SBR rubber composite containing thermally modified silica shows improved silica particle dispersion. However, when physically mixed silica is used, the silica is mainly located on the surface and agglomerated.
引用
收藏
页码:159 / 164
页数:6
相关论文
共 18 条
[1]   Silylation and surface properties of chemically grafted hydrophobic silica [J].
Capel-Sanchez, MC ;
Barrio, L ;
Campos-Martin, JM ;
Fierro, JLG .
JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2004, 277 (01) :146-153
[2]   Surface modification of silica: 1. Thermodynamic aspects and effect on elastomer reinforcement [J].
Castellano, M ;
Conzatti, L ;
Costa, G ;
Falqui, L ;
Turturro, A ;
Valenti, B ;
Negroni, F .
POLYMER, 2005, 46 (03) :695-703
[3]   Influence of filler type and content on properties of styrene-butadiene rubber (SBR) compound reinforced with carbon black or silica [J].
Choi, SS ;
Park, BH ;
Song, H .
POLYMERS FOR ADVANCED TECHNOLOGIES, 2004, 15 (03) :122-127
[4]   Influence of storage time and temperature and silane coupling agent on bound rubber formation in filled styrene-butadiene rubber compounds [J].
Choi, SS .
POLYMER TESTING, 2002, 21 (02) :201-208
[5]   Mica as additional filler in SBR - silica compounds [J].
Furtado, CRG ;
Leblanc, JL ;
Nunes, RCR .
EUROPEAN POLYMER JOURNAL, 2000, 36 (08) :1717-1723
[6]   Use of p-toluenesulfonic acid for the controlled grafting of alkoxysilanes onto silanol containing surfaces:: Preparation of tunable hydrophilic, hydrophobic, and super-hydrophobic silica [J].
Garcia, Nuria ;
Benito, Esperanza ;
Guzman, Julio ;
Tiemblo, Pilar .
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 2007, 129 (16) :5052-5060
[7]   Analysis of the non-linear viscoelastic behaviour of silica filled styrene butadiene rubber [J].
Gauthier, C ;
Reynaud, E ;
Vassoille, R ;
Ladouce-Stelandre, L .
POLYMER, 2004, 45 (08) :2761-2771
[8]   Development of hybrid materials consisting of SiO2 microparticles embedded in phenolic-formaldehydic resin polymer matrices [J].
Hernández-Padrón, G ;
Rojas, F ;
García-Garduño, M ;
Canseco, MA ;
Castaño, VM .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 355 (1-2) :338-347
[9]   Creation of asymmetric bilayer membrane on monodispersed colloidal silica particles [J].
Katagiri, K ;
Hashizume, M ;
Kikuchi, J ;
Taketani, Y ;
Murakami, M .
COLLOIDS AND SURFACES B-BIOINTERFACES, 2004, 38 (3-4) :149-153
[10]   Tuning the hydrophobic properties of silica particles by surface silanization using mixed self-assembled monolayers [J].
Kulkami, Sneha A. ;
Ogale, Satishchandra B. ;
Vijayamohanan, Kunjukrishanan P. .
JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2008, 318 (02) :372-379