Effect of Fly Ash/Alkaline Activator Ratio and Sodium Silicate/NaOH Ratio on Fly Ash Geopolymer Coating Strength

被引：10

作者：

Liyana, J. ^{[1
]}

Al Bakri, A. M. Mustafa ^{[1
]}

Kamarudin, H. ^{[1
]}

Ruzaidi, C. M. ^{[1
]}

Azura, A. R. ^{[2
]}

机构：

[1] Univ Malaysia Perlis, Ctr Excellence Geopolymer & Green Technol CEGeoGT, Sch Mat Engn, Kangar 01000, Perlis, Malaysia

[2] Univ Sains Malaysia, Sch Mat & Minerals Resources Engn, Sains, Malaysia

来源：

ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY II | 2014年 / 594-595卷

关键词：

geopolynner; ratio; fly ash; coating; strength;

D O I：

10.4028/www.scientific.net/KEM.594-595.146

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Fly ash geopolymer coating material potential used to protect surface used in exposure conditions. Ratio of fly ash/alkaline activator and Na2SiO3/NaOH play important parameter on determining the best flexural strength of geopolymer coating material. Fly ash and alkali activator (Al2O3/Na2SiO3) were mixed with the solids-to-liquid ratios in range of 1.0-3.0 and different ratios of Na2SiO3/NaOH (1.0-3.0) to prepare geopolymer coating material at constant NaOH concentration of 10 M. Effect of fly ash/alkaline activator ratio and Na2SiO3/NaOH on geopolymer coating was determined with respect to the highest flexural strength of the 1200 degrees C sintering temperature of geopolymer coating substrates. The results concluded that the highest strength for fly ash geopolymer coating material is achieved 42 MPa when the solid/liquid ratio is 2.0 and the Na2SiO3/NaOH ratio is 2.5.

引用

页码：146 / +

页数：2

共 11 条

[1] Study on Fly Ash Based Geopolymer for Coating Applications
Abdullah, Mohd Mustafa Al Bakri
Jamaludin, Liyana
Hussin, Kamarudin
Binhussain, Mohammad
Ghazali, Che Mohd Ruzaidi
Ahmed, Mohd Izzat
[J]. GREEN TECHNOLOGIES FOR SUSTAINABLE & INNOVATION IN MATERIALS, 2013, 686 : 227 - +
[2] Correlation between Na2SiO3/NaOH Ratio and Fly Ash/Alkaline Activator Ratio to the Strength of Geopolymer
Al Bakri, A. M. Mustafa
Kamarudin, H.
Nizar, I. Khairul
Bnhussain, M.
Zarina, Y.
Rafiza, A. R.
[J]. MATERIAL AND MANUFACTURING TECHNOLOGY II, PTS 1 AND 2, 2012, 341-342 : 189 - 193
[3] [Anonymous], ADV MAT RES
[4] GEOPOLYMERS - INORGANIC POLYMERIC NEW MATERIALS
DAVIDOVITS, J
[J]. JOURNAL OF THERMAL ANALYSIS, 1991, 37 (08): : 1633 - 1656
[5] Geopolymer technology:: the current state of the art
Duxson, P.
Fernandez-Jimenez, A.
Provis, J. L.
Lukey, G. C.
Palomo, A.
van Deventer, J. S. J.
[J]. JOURNAL OF MATERIALS SCIENCE, 2007, 42 (09) : 2917 - 2933
[6] Hardjito D., 2005, Research Rep. GC 1
[7] Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperatures
Kong, Daniel L. Y.
Sanjayan, Jay G.
Sagoe-Crentsil, Kwesi
[J]. CEMENT AND CONCRETE RESEARCH, 2007, 37 (12) : 1583 - 1589
[8] Satapathy Alok, 2009, WASTE MANAGE RES, P1
[9] Skvára F, 2006, CERAM-SILIKATY, V50, P208
[10] Thermal properties of spray-coated geopolymer-type compositions
Temuujin, J.
Minjigmaa, A.
Rickard, W.
van Riessen, A.
[J]. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2012, 107 (01) : 287 - 292

← 1 2 →